User's Manual

SoundStation

Wireless Microphone Quick Start Guide

SoundStation

Wireless Microphone Quick Start Guide

Parts List

The Polycom SoundStation Wireless

Microphones connect to your SoundStation

VTX 1000 or SoundStation IP 6000 ,

allowing you to wirelessly reinforce the

audio pick-up range during conference

calls.

The following items are included

in your SoundStation Wireless

Microphone package. If you are

missing any items, contact your

SoundStation Wireless Microphone

reseller.

Wireless Microphone

Power Adapter

Charging Cradle

Wireless Receiver

Cohesive Tape

(Not shown: Country-Speciﬁ c Power Cable)

For use with SoundStation

VTX 1000 or SoundStation

IP 6000

PAGE 1
SoundStation® Wireless Microphone Quick Start Guide ® ® For use with SoundStation VTX 1000 or SoundStation IP 6000 Parts List The Polycom SoundStation Wireless Microphones connect to your SoundStation VTX 1000 or SoundStation IP 6000 , allowing you to wirelessly reinforce the audio pick-up range during conference calls. The following items are included in your SoundStation Wireless Microphone package. If you are missing any items, contact your SoundStation Wireless Microphone reseller.
PAGE 2
Features Mute / Unmute LED Mute / Pair key Pair / Power LED Battery door Power on/off switch Recess for Charging PIN Connecting the Receiver to the Conferencing Phone To connect the receiver, plug the RJ9 cable (attached to the receiver) into the microphone port on your SoundStation console. Your SoundStation will detect the receiver and configure it for use automatically.
PAGE 3
Charging the Wireless Microphone To charge the batteries in the microphones: 1. Place the wireless microphone onto the charging pins in one of the Charging Cradle microphone slots. Make sure the Charging Cradle is plugged into an electrical outlet. While using the charging cradle, the Pair / Power LED on the wireless microphone appears red. Once charging completes, the Pair / Power LED turns to green.
PAGE 4