User Manual

that the pins are aligned properly.
5. Place the battery control back into the slot.
6. Align the back plate in.
7. Replace the screws back in using the Phillips no.1 screwdriver and tighten it.
8. Reconnect any cables you removed.
5.9 Removing a Memory Module
If you need to remove a memory module:
1. Ensure that the Scribbler is turned off and all cables are disconnected.
2. Repeat steps 1-2 in “Adding a memory module”.
3. Slide the memory module by it’s edges from the slot.
Repeat steps 5-8 in “Adding a memory module”.
5.10 Using External Display Devices
The Scribbler comes with an LCD display, but it can easily attach an external monitor if a
larger screen is required.
1. Connect the monitor’s video cable to the RGB (monitor) port on the Scribbler.
2. Connect the monitor’s power cable to a live electrical outlet.
3. Turn on the external monitor.
4. Hold the “right click” and tap on the screen.
5. Select Graphics Option
6. Output to
7. You now have four of the available options:
Notebook ♦
♦
♦
♦
Monitor
Intel(R) Dual Display Clone
Extended Desktop
The system automatically sets the screen to display on Notebook. Only the Scribbler screen
is on.
The Monitor option allows you to project materials onto another screen, while leaving the
Scribbler screen blank.
The Intel(R) Dual Display Clone option allows materials to project onto both the screen of
40