User Manual

Steps Procedures
1 Insert a USB Keyboard and a USB CD DRIVE into the USB drives
either on the side or at the top of the Scribbler.
2 Boot up Scribbler
3 Press ESCAPE to go to the BIOS SETUP info
4 Go to BOOT sequence and change the BOOTABLE sequence from
CD ROM (by applying + and – keys of your Keyboard)
5 Insert RECOVERY CD #1 (one) in CD drive – systems will boot up
from it.
6 Press “R” to display system recovery option
7 Three options will be displayed:
1. “R” for Standard Systems Recovery Option
2. “F” to format drive and perform a full system recovery
3. “Q” to quit and to boot the OS on Hard Disk
(Preferably it is better to select “F” for a clean system installation)
8 System Recovery Partition will be created. Please wait until it is
completed.
9 SCRIBBLER SYSTEMS RECOVERY – Step by step, it will finish
the installation, no interaction in between is necessary
10 When asked for the RECOVERY CD #2 (two), please insert the
relevant CD into the drive and press OK (enter)
11 The system will ask to take out all of the CD’s, please do so,
disconnect the CD Drive and reboot the Scribbler
12 “Welcome to Microsoft Windows” screen will pop up, click NEXT
13 Select your Systems setting with relevant
REGION-LANGUAGE-TYPE OF KEYBOARD, click NEXT
14 Select your Time Zone (click automatically adjust clock for daylight
saving time – if relevant), click NEXT
15 “The End User Licensing Agreement” – screen will pop up click
“Yes I Accept” and then click NEXT
16 “What’s your Computer’s Name” will pop up, please fill in the
relevant info, and then click NEXT (you have the option to SKIP
this screen)
17 System will check your Internet connectivity, click NEXT
18 Register with Microsoft, after that click NEXT
19 “Who will use this computer” – screen will pop up please fill in the
relevant fields, and click NEXT
20 CONGRATULATIONS – you have successfully done a full system
48