TATUNG TDR series Digital Recording System Page TDR-22XX series Digital Recording System Installation and Operation Manual V 1.01 TATUNG COMPANY OF AMERICA. INC 2850 El Presidio St., Long Beach CA 90810 USA Tel: 310-637-2105 Fax: 310-638-2180 www.tatungusa.
TATUNG TDR series Digital Recording System Page 0
TATUNG TDR series Digital Recording System Page CONTENTS Chapter 1: Installation Step 1 Connect the cables Step 2 Turn on the system Chapter 2: Watch Mode 2.1 2.2 2.3 2.4 2.5 Channel display window Selection of Split screen Motion Tracker Mode switch button On/Off button Chapter 3: Setup Mode 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 Channel Schedule Speed Color Motion P/T/Z Control Password Voice Exit Chapter 4: Search Mode 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.
TATUNG TDR series Digital Recording System Page 0
TATUNG TDR series Digital Recording System Page CHAPTER 1: INSTALLATION Place the Digital Recording System on the flat surface or mount it on the 19” rack. * For TDR-2209 there are only 9 camera Inputs and 9 Loop through outputs on the back board. For TDR-2204 there are only 4 camera Inputs and 4 Loop through outputs on the back board. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
TATUNG TDR series Digital Recording System Page 2 Step 1: Connect the Cables Connect all the necessary connector and signal cables into the correct ports. Alarm In/Out Audio In Camera In Audio Out Camera Out CCTV Monitor Out PC Monitor Output Network Port Power In Protect Socket and LPT * For TDR-2209 there are only 9 camera Inputs and 9 Loop through outputs on the back board. For TDR-2204 there are only 4 camera Inputs and 4 Loop through outputs on the back board.
TATUNG TDR series Digital Recording System Page CHAPTER 2: WATCH MODE Turn on the system. The main screen of TATUNG TDR-22XX series appears as below. Note: For TDR-2209 there are only 9 channels split the screen. For TDR-2204 there are only 4 channels split the screen The buttons and icons on the screen are described below: Note: For TDR-2209, the Button of 9 Sequence and the button of 16 will show the all 9 channel at same time.
TATUNG TDR series Digital Recording System Page 4 7. Full SCR Button This button allows you to hide all buttons and icons and enlarge the display windows to the FULL SCREEN. You have to right click to get back to normal. Once you get the full screen, if you LEFT click, the screen can not go back to normal, instead, the picture the mouse arrow sitting on will be enlarged to full screen. 8. Motion Button Click to enable the motion tracking function.
TATUNG TDR series Digital Recording System Page 2.1 Channel display window 1. Channel (Camera) name 2. Image display window 3. Record status lamp 1. Channel (Camera) name Identify the name for each channel. You may assign the channel name in SETUP mode. 2. Image Display window This area displays the image comes from the camera. 3. Recording status lamp This lamp turns red at consecutive recording When motion recording, this lamp becomes blue and white.
TATUNG TDR series Digital Recording System Page 6 2.2 Selection of Split screen Selection of window division mode that is available in 1 division window (sequence from channel 1 to channel 16), 4 window, 9 window, 16 window, and Full screen display. Click on the one of these buttons to perform the function Note: At all Ch Display, left click a specific camera, the image of this camera will be enlarged without sequencing. And left-click again can go back to the normal status.
TATUNG TDR series Digital Recording System Page 7 2.3 Motion Tracker This function allows you to track the path of a moving object from one channel to another. All image windows this object passed by will be enlarged. Therefore, the object will always display on an enlarged window. Click on this button to enable the motion tracking function. Note: To enable this function, all channels need to be programmed to motion recording.
TATUNG TDR series Digital Recording System Page 8 2.4 Mode Switch button There are four function modes can be selected in this system. Click on the one of these buttons to perform the function SETUP: Click to switch to SETUP MODE. The setup mode includes buttons of CHANNEL, SCHEDULE, SPEED, COLOR, MOTION, P/T/Z PROTOCOL, PASSWORD, and VOICE. With these buttons your system can be customprogrammed to fit your operation requirements. SEARCH: Click to switch to SEARCH MODE. .
TATUNG TDR series Digital Recording System Page 9 CHAPTER 3: SETUP MODE The first screen of the setup mode will be the channel setting as the following picture Note: For TDR-2209, CH 10 to CH 16 will be empty by the factory’s setting. For TDR-2204, CH 05 to CH 16 will be empty by factory’s setting The control buttons contained in the main screen are described below: 1. Channel Click on this button to setup the channel and channel name.
TATUNG TDR series Digital Recording System Page 10 6. P/T/Z camera protocol Click to setup the communication port and protocol used to communicate between Tatung’s DVR and the camera connected. 7. Password Click on this button to setup the user name and password for access security. The passwords are divided in SETUP, VIEWER, SHUTDOWN, and REMOTE four levels. Hiding camera can also be programmed with this setup. 8. Audio Click to setup the audio recording function. 9.
TATUNG TDR series Digital Recording System Page 11 3.1 Channel This function button (as shown below) can be used to setup the channels. There are two different types of channel setting, manual or automatic. Click this button to start the channel setup and the screen will be shown as below. Note: For TDR-2209, CH 10 to CH 16 will be empty by the factory’s setting. For TDR-2204, CH 05 to CH 16 will be empty by factory’s setting 1.
TATUNG TDR series Digital Recording System 2. Page 12 Setup the name Setup the channel name by following the procedure 1. 2. 3. Click the channel number Key in the name of the channel Limited to 14 characters and number including space. 2. Key in the channel name 1. Click to choose channel here 3. EXIT You may click any other icon to exit Channel Setup Mode and go directly into other setup mode. Click EXIT button, you will be back to Watch Mode.
TATUNG TDR series Digital Recording System Page 13 3.2 Schedule This function button (as shown below) is used to setup the schedules. Click on this button to start schedule setup and the screen will display as follow. (Please follow the 7 steps below) Note: For TDR-2209, Camera’s CH 10 to CH 16 and Motion’s CH 10 to CH 16 will be useless even you activate it. For TDR2204, Camera’s CH 05 to CH 16 and Motion’s CH 05 to CH 16 will be useless even you activate it.
TATUNG TDR series Digital Recording System Page 14 4. Activate the camera Click the camera icon to activate the cameras which are used in this group. 5. Select the Recording mode Select the recording mode for each channel. There are three recording modes. DEFAULT Continuous recording Motion Record while motion detected Sensor Record while Sensor is active 6. Setup Alarm Out: Alarm Output may setup when either a sensor is triggered or motion is detected. 7.
TATUNG TDR series Digital Recording System Page 3.3 Speed This function button (as shown below) can be used to setup the recording speeds. Click this button the screen displays as below. Normal Recording Speed Dragging the cursor can designate normal recording speed (frame rate) for each camera or all cameras (Separate frame rate for each camera is available).
TATUNG TDR series Digital Recording System Page 16 MISC Check on the box if you want the following features to be enabled. Sensor Beep Activate beep sound when sensor is triggered. Proportion When activated, only 1, 4, 9, 16 divisions are available, to keep the horizontal and vertical ratio of each channel window. Motion Log Activated Motion log function. Recording While Searching Continue to record when the system in search mode.
TATUNG TDR series Digital Recording System Page 3.4 Color This function button (as shown below) is used to setup the colors. Click this button to setup the color, the screen will be shown as below. 1. Select channel Select the channel (from 1 to 16) you want to adjust. 2. Adjust the Color Drag the cursor to adjust the followings for each channel. Bright: Const: Color: Tint: Default color: 3. Adjust the brightness. Adjust the contrast. Adjust the color saturation. Adjust the tint.
TATUNG TDR series Digital Recording System Page 18 3.5 Motion This function button (as shown below) can be used to setup the motions. Click on this button to setup the motion, the screen display as the below (Please following the 4 steps) 1. Select channel Select the channel from 1 to 16. 2. Set up motion detection zone. Setup the motion detection zone for each channel by click and drag. It would be seen in red square (Maximum 10 areas per camera). 3. Set up the MISC options.
TATUNG TDR series Digital Recording System Page 19 Sensitivity Set the sensitivity of software motion detection. At highest sensitivity even very trivial motion will be detected. Clear all block All of the detecting zones for a specific channel. 4. EXIT You may click any other icon to exit Motion Setup Mode and go directly into other setup mode. Click EXIT button to go back to Watch Mode.
TATUNG TDR series Digital Recording System Page 3.6 P/T/Z Protocol This function button (as shown below) is used to setup P/T/Z Protocol. Click on this button to setup the P/T/Z Protocol, the screen display as the below Click to choose a manufacturer brand from list Click to assign communication port. Please select the same protocol as that of your camera. EXIT You may click any other icon to exit Protocol Setup Mode and go directly into other setup mode. Click EXIT button to go back to Watch Mode.
TATUNG TDR series Digital Recording System Page 3.7 Password This function button (as shown below) can be used to setup the password. Click on this button to setup the Password. Note: For TDR-2209, the Hide Camera function CH 10 to CH 16 will be useless even you activate it. For TDR-2204, the Hide Camera function CH 05 to CH 16 will be useless even you activate it. • Note: See next page for the remote access password. Password There are five levels of password for security purpose.
TATUNG TDR series Digital Recording System • Page 22 Remote username/password Select the Remote Access in the Password Select window. An Input Password window will be prompted up. After entering the password and click OK, the following screen will be shown. TATUNG TDR series allow the administrator to sign up remote users. NOTE: To set up the Remote username/password.
TATUNG TDR series Digital Recording System Page • Hide Cameras Check the box(es) to hide the channel(s) from the server site. • Restart Window Check the box of the day and assign the time to restart the system. Note: For TDR-2209, the Hide Camera function of Remote Client CH 10 to CH 16 will be useless even you activate it. For TDR-2204, the Hide Camera function of Remote Client CH 05 to CH 16 will be useless even you activate it.
TATUNG TDR series Digital Recording System Page 24 3.8 Voice This function button (as shown below) is used to setup the voice settings. Click on this button to setup the voice, the screen display as the below (Please follow the steps) Audio Channel one Note: To have a better voice play back quality. The image recording speed is better to set to mote than 2 FPS. 1. Check the box of “sound” Check on this box to enable the sound recording. 2.
TATUNG TDR series Digital Recording System Page 3.9 Exit Click on EXIT button to switch back to WATCH MODE after you complete all the setting in the SETUP mode. Note: You can always click on the EXIT to switch back to watch mode no matter what function mode you are in.
TATUNG TDR series Digital Recording System Page 26 CHAPTER 4: SEARCH MODE The main screen of the search mode is shown below. Note: For TDR-2209 there are only 9 channels split the screen. For TDR-2204 there are only 4 channels split the screen The buttons and icons of the main screen are described below: 1. Date/Time Click on this button to search the images from Date and Time. A calendar like data selection window including From-Time and To-Time will be prompted up. 2.
TATUNG TDR series Digital Recording System Page 27 7. Exit Click this button to exit the Search Mode and back to the Watch Mode. 8. Mute Box Check this box to disable the audio playback. 9. Channel playback window This is the area to display the playback images along with the channel names and the recording date and time.
TATUNG TDR series Digital Recording System Page 28 4.1 Channel play back window This area is the 16 channels play-back window. All channels can be played back synchronously. Note: You can always enlarge a specific channel by left clicking on this channel and left click again to back to the multi channel playback mode. Channel Name Note: For TDR-2209 there are only 9 channels split the screen.
TATUNG TDR series Digital Recording System Page 29 4.2 Buttons on Play Back Console These buttons are used to control the data stream. 1 min back Note: You can always playback the images no matter you are in the multi channel playback mode or one specific channel playback mode.
TATUNG TDR series Digital Recording System Page 30 4.3 Date/Time This function button is used to search the images from date and time. Click this button, the screen will prompt out a calendar like data selection window displayed as the below. You may search the images recorded on the selected date and time. (Please follow the steps below) Note: You can always select the date/time no matter you are in the multi channel playback mode or one specific channel playback mode.
TATUNG TDR series Digital Recording System Page 31 4. Start After complete the date and time selection, click on “Start” button to search or playback the recorded images.(after clicking, the selection window will disappear). 5. EXIT If you want to cancel this date and time selection, click “EXIT” to back to the main screen of the search mode. (The whole selection window will disappear).
TATUNG TDR series Digital Recording System Page 32 4.4 Log Function button can be used to search the images from motion recording and sensor recording logs. Click this button the screen will prompt out a data list displayed as below. (Please follow the steps below) Click here to review the Sensor Recording Log Click here to review the Motion Recording Log Select the Log and click here to playback the data Date selection Time selection Close Log Search function List item 1. 2. 3. 4. 5.
TATUNG TDR series Digital Recording System Page 33 4.5 Save Disk This function button is used to save a short period of images to a floppy disk. Channels and number of frames are selectable in this function. Click on this button the screen will prompt out a save disk window as below (Please follow the steps below) Number of frames wanted to save for all channels.
TATUNG TDR series Digital Recording System Page 34 4.6 Print This function is to print the specific image on the system printer as the immediately data retrieve. Channels and frames are selectable in this function. Click on this button to print the specific image to floppy disk as the immediately data retrieve. The screen will prompt out a print window as below (Please follow the steps) Number of frame wanted to print for all channels. Title that will be printed on the paper.
TATUNG TDR series Digital Recording System Page 35 4.7 Storage Capacity Function is used to check the usage information of the removable HDD. Click on this button to have the prompt out window of storage information. Note: If the sound recording function is disabled, the sound storage space reserved will be constituted part of the total storage capacity. 4.8 EXIT Click on this button to leave the Search Mode and back to the Watch Mode.
TATUNG TDR series Digital Recording System Page 36 CHAPTER 5: BACKUP MODE After clicking the Backup button, the following window is prompted out. Note: In this mode, the system will hold the recording. After you complete the scheduling and back to watch mode, the system will record again. Auto backup Function Windows explorer Note: In this mode, if you want to backup or save the data into CD- RW DRIVE.
TATUNG TDR series Digital Recording System Page 5.1 Auto Backup This function is used to back up the recorded images from a customized time schedule. The execution time of the backup can also be designated. The screen will prompt out the following window after clicking on the Auto Backup button. (Please follow the steps below) Note: The scheduled backup function is to backup the previous day’s data.
TATUNG TDR series Digital Recording System 3. 4. Page 38 Immediately backup option If you want to immediately backup some images, skip steps 1 & 2 and follow the steps below. a. Assign the backup date b. Assign the starting time and ending time c. Select the backup device d.
TATUNG TDR series Digital Recording System Page 39 5.2 AVI Backup This function is to back up the selected data immediately to AVI (Windows default audio and video information file). The screen will prompt out the windows as below after click on this button. (Please follow the steps). Note: You can also search the data from the list by click on the “File Information “button. 1. Camera Select the camera (channel) to backup 2. Backup Date Assign the date of the data to backup 3.
TATUNG TDR series Digital Recording System Page 40 5.3 Explorer This function is to call out the WINDOWS explorer which let the operator control this system. The screen will prompt out the Windows explorer as below. 5.4 Cancel Cancel this function mode and back to watch mode.
TATUNG TDR series Digital Recording System Page CHAPTER 6: CONTROL MODE The main screen of the control mode is as the following picture Note: For TDR-2209 there are only 9 channels split the screen. For TDR-2204 there are only 4 channels split the screen Camera selection panel P/T control panel ZOOM/FOCUS/PRESET Control button 6.
TATUNG TDR series Digital Recording System Page • . ZOOM/FOCUS/PRESET Panel: Zoom/Focus/Preset panel ZOOM/FOCUS control Load the default setting for selected camera 6.2 EXIT Click on this button to exit the control mode and back to the Watch mode.
TATUNG TDR series Digital Recording System Page 43 APPENDIX A: TDR-22xx Series Digital Recording System 4 (TDR-2204) /9 (TDR-2209) /16 (TDR-2216) CAMERA INPUTS Product Features • • • • • • • • • • • • • • • Highest speed, Multi-Channel Recording Real time, Multi-Channel display Duplex Multi-Channel playback High quality images High speed searching Long Period recording Scheduled recording by groups Dual Media Device (HDD + CDRW) Motion Detection Pan/Tilt/Zoom Control Network Surveillance and Remote Sur
TATUNG TDR series Digital Recording System Page SOFTWARE: Operation System Display Speed TDR-2216 TDR-2209 TDR-2204 Record Speed TDR-2216 TDR-2209 TDR-2204 Windows 98 Second edition Real-time 480FPS 270FPS 120FPS MODELS 240FPS MAX 240FPS MAX 120FPS MAX GENERAL Operation Temperature Relative Humidity Dimensions Weight (Approximate) 41° to 104°F (5° to 40°C). Maximum 80% non- condensing 7” H x 17” W x 18” D (17.78 x 43.18 x 45.72 cm) 46.2 lb (20.96 kg) unit 58.3 lb (26.
TATUNG TDR series Digital Recording System Page 45 TDR-22xx Series Storage and Recording time TDR2216 (Hours) Best Quality 240 FPS 4 8 12 16 32 48 40 GB 80 GB 120 GB 160 GB 320 GB 480 GB TDR2209 (Hours) 40 GB 80 GB 120 GB 160 GB 320 GB 480 GB TDR2204 (Hours) 40 GB 80 GB 120 GB 160 GB 320 GB 120 FPS 8 16 24 32 64 96 Good Quality 16 FPS 60 120 180 240 480 720 240 FPS 6 12 18 24 48 72 Best Quality 240 FPS 4 8 12 16 32 48 120 FPS 8 16 24 32 64 96 60 FPS 16 32 48 64 128 192 60 FPS 16 32 48 64 128
TATUNG TDR series Digital Recording System 46 Page APPENDIX B: Connector Configuration • Camera In/Out CH 01 CH 16 Camera In Camera Out * For TDR-2209 there are only 9 camera Inputs and 9 Loop through outputs on the back board. For TDR-2204 there are only 4 camera Inputs and 4 Loop through outputs on the back board.
