Operation Manual

31
First, select the correct signal source (ANT, STD, IRC,
HRC). See previous step.
1Press the MENU button to display the main menu.
2.Press the VOL(+) or VOL(-) button to select the TV
Setting.
3.Press the ENTER button to TV Setting.
4.Press the UP or DOWN button to select the Auto
scan (Yes).
5.Press the VOL (+) or VOL (-) button to select “Ye s” ,
The TV automatically cycles through all of the
available channels and stores them in memory. This
takes about one or two minutes.
6.After all the available channels are stored, the CH
program menu reappears.
Adding and Erasing Channels (Manual Method)
1.Press the MENU button to display the main menu.
2.Press the VOL(+) or VOL(-) button to select the TV
Setting.
3.Press the ENTER button to TV Setting.
4.Press the UP or DOWN button to select the
Add/Erase (Add).
PIP
PC
TV
TV Setting
ANT/CATV ( ANT )
Autoscan .. ( Yes… )
Add/Erase ( Add )
Parent Control
Caption ( Off )
Fine Tune -- ＋
No Ye s
－ ＋
VOL(-)
Up
VOL(+)
M
enu/Ente
r
Title/Exit
D
own