Tatung LCD TV User Manual 0
Table of contents 1. General Information …………………………………………………………3 2. Safety Precautions ……………………………………………………………4 3. Features ................…………………………………………………………….7 4. Connection ...........……………………………………………………………..8 5. Controls Location ……………………………………………………………11 6. Accessories ..........…………………………………………………………….12 7. Remote Control....……………………………………………………………13 Summary of Control Button……………………………………………………14 8. Controls & Adjustment A. General Adjustment .................................................
E. Other function explanation .................……………………………………..…43 9.OSD Language List………………………………………………………………45 10. Troubleshooting. ………………………………………………………………50 11.
General Information Tatung LCD TV is the latest multi-display active matrix TFT (thin film transistor) liquid crystal high brightness display unit. It is designed to use with VIDEO electronics appliances and PC. Important Information Warning: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION Risk of electric shock. Do not open. Caution: To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside.
WARNING: According to industry standards, there are certain numbers of defective pixels both bright and dark that are acceptable. Although we produce panels with more than 99.99 percent active cells, there still may be some cells that do not produce light or remain lit. For more information, please contact sales or the technical support at 800.827.2850. Thank You for Choosing This Product Your new LCD TV represents the latest product in television technology.
Safety Precautions 1. Cleaning: Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid or aerosol cleaners. 2. Water and moisture: Do not use the product near water, such as bathtubs, washbasins, kitchen sinks, laundry tub, swimming pools or wet basements. 3. Heat sources: Keep away from heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers). 4.
6. Stand: Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Use only mounting hardware recommended by the manufacturer. 7. Use care when moving the product on a rolling cart.
Features List of Features Your TV was designed with the latest technology that includes the following special features: 1. Standard VESA mounting holes for use of a wall mount or robot arm. 2. Rotate and tilt features to optimize viewing. 3. Easy-to-use remote control. 4. Easy-to-use on-screen menu system. 5. PIP (picture in picture) 6. Headphone jack for private listening. 7. 16:9 letterbox format available depending upon source. 8. Built-in dual channel speakers. 9.
Connection DVD VIDEO Input device 8
PC Head Phone VIDEO Output device SUBWOOFER OUT Antenna terminal 9
Control Location These buttons control your TV’s basic features including on-screen menus. To use the advanced features, you must the remote control. POWER: turn on or turn off the LCD TV. SOURCE: set up the input source (PC,VIDEO,SV,TV,CV). MENU: displays the main menu. CHANEL (down/up): change channels on sequence. VOLUME(+/-): turn up or turn down the volume. ASPECT RATIO: sets up the display (Normal, Periscope, Zoom or Full).
Accessories User’s manual Remote control & Batteries (4A x2) 15 Pin D-Sub Signal Cable Antenna Cable Power Cord 11
Remote Control The remote control pad illustrates the basic functions or your remote control.
Summary of Control Button Power control Press POWER button Turns the display on/off Selecting the signal source Press TV button Press AV button Press SV button Press CV button Press PC button Switches to TV mode. Switches to AV Video mode. Switches to S-Video mode. Switches to Component mode (Y Pb Pr). Switches to PC mode. Menu Setting Press MENU/ENTER button Press TITLE/EXIT button Displays the main on-screen menu or enter for the next menu. Displays the current channel digits or exits from the menu.
Controls & Adjustment A. General Adjustment Turning the LCD-TV On and Off: To turn on the TV, plug the power cable into a 110V or 220V outlet. Press the Power button on the top of the panel or you can use the remote to turn the TV on. An indicator light shows as follows: In PC mode In PC mode (power save) In TV, AV, SV, CV mode ------- Green light Orange light Blue light Viewing the Menus and On-Screen Displays: Viewing the Menus 1.With the power on, press the MENU Button.
Switching PC/Video/S-Video/TV/Component Modes: TV Power PC AV 1.Turn on the power of the connected video equipment. 2.Press the applicable input source. SV CV Press TV button to switch to TV mode. Press PC button to switch to PC mode (VGA). Press AV button to switch to AV mode. Press SV button to switch to S-Video mode. Press CV button to switch to CV mode (Y, Pb/Cb, Pr/Cr). Switching Language Modes: 1.Press the MENU button to display the main menu. 2. Press the ENTER button to enter Management.
M TV PC PIP Language English Frangais Deutsch Espanol 繁體中文 4. Press the EXIT button to exit OSD mode. Adjusting the Volume: Using Volume Control Press the VOL (+) or VOL (-) button to increase or decrease the sound volume. Using Mute At any time, you can temporarily disable the sound using the Mute button. Mute VOL(+) VOL(-) 1. Press the MUTE button and the sound is disabled. 2. Press the MUTE again or VOL(+) or VOL(-) button to turn the sound back to the previous level.
How to enter the Menu Items : 1.Press the MENU button to display the main menu screen. M TV PIP PC Management VOL(-) Up VOL(+) Menu/Enter Title/Exit Down Main Display ( PIP Display AV ( Off ( No ) ) Language Reset ) NTSC H ： 31.2 kHz V ： 50.2 Hz 2.Use the VOL(+) or VOL(-) button to select one of the menu option. Then press the ENTER button to access the menu’s Sub-menu. 3. Press the VOL(+) or VOL(-) button to make adjustments. 4.
3 seconds. B.PC mode Adjustment Adjusting the Contrast & Brightness Settings: You may need to perform separate adjustments for brightness and contrast for different video modes. Generally, PC mode will be best viewed with lower brightness and contrast settings than are appropriate for the other modes. 1. Press the MENU button to display the main menu. M VOL(-) Up VOL(+) Menu/Enter Title/Exit Down TV PIP PC Management Main Display PIP Display Language Reset NTSC H ： 31.
Contrast + － 6.Press the EXIT button to return to the previous screen or exit. Adjusting the Picture Adjust Settings: 1.Press the MENU button to display the main menu. M VOL(-) Up VOL(+) Menu/Enter Title/Exit Down TV PIP PC Management Main Display PIP Display Language Reset NTSC H ： 31.2 kHz V ( ) ( PC Off ( No ) ) ： 50.2 Hz 2.Press the VOL(+) or VOL(-) button to move the cursor to Picture Adjust. TV PC PIP Picture Adjust － － Brightness Contrast Color Temp ＋ ＋ ( Neut ) 3.
5.1When selecting user, press the ENTER button to enter User Color Adjust. TV PIP PC Color Temp － － － R G B ＋ ＋ ＋ 5.2 Press the UP or DOWN button to the desired item(R, G, B). 5.3 Press the VOL (+) or VOL (-) button to set the desired item(R, G, B). R － + G － + B － + 6. Press the EXIT button to return to the previous screen or exit. Adjusting the Image Adjust Settings : 1. Press the MENU button to display the main menu .
PC TV H Position V Position Phase Clock PIP PC Adjust － － － － ＋ ＋ ＋ ＋ Auto Image ( NO ) 3. Press the ENTER button to enter PC Adjust. 4. Press the UP or DOWN button to the desired item (H. Position V. Position Phase. Clock. Auto Image). 5. Press the VOL (+) or VOL (-) button to set the desired item (H Position V Position Phase. Clock. Auto Image). H Position － + V Position － + Phase － + Clock － + 6. Press the EXIT button to return to the previous screen or exit.
2.Press the VOL(+) or VOL(-) button to move the cursor to Audio Adjust. TV Treble Bass Balance VOL(-) Up VOL(+) Menu/Enter Title/Exit Down PIP PC Audio Adjust － . － . － Sound Mute ＋ ＋ ＋ ( Main ) ( No ) 3. Press the ENTER button to enter Audio Adjust. 4. Press the UP or DOWN button to the desired item (Treble. Bass. Balance. Sound. Mute. ). 5. Press the VOL (+) or VOL (-) button to set the desired item (Treble, Bass, Balance, Sound, Mute).
TV PIP PC Audio Adjust － － － Treble Bass Balance Sound Mute ＋ ＋ ＋ ( Main ( No No ) ) Yes － ＋ 6. Press the EXIT button to return to the previous screen or exit. Viewing Picture-in-Picture ( PIP): PIP: When you select PC source as the main display, you can also select another source as sub-display: Video, S-video, TV and Component video. PC source cannot be used in PIP Display. You can use the PIP feature to simultaneously watch two video sources. Activating Picture-in-Picture 1.
3.Press the VOL (+) or VOL (-) button to select the desired source. 4.Return to previous OSD and press the VOL(+) or VOL(-) button to select the PIP. TV PC PIP － － － － － － － H Position V Position PIP Size Border Hue Saturation Sharpness PIP ＋ ＋ ＋ ＋ ＋ ＋ ＋ 5.Press the ENTER button to enter PIP. 6. Press the UP or DOWN button to select the desired item (H/V Position, PIP Size, Border, Hue, Saturation, Sharpness). 7. Press the VOL (+) or VOL (-) button to set the desired item.
A shortcut to access the PIP menu: Simply press the PIP Function Button on the remote control. Selecting a Signal Source (External A/V) for PIP Press the ON/OFF button to display the PIP window. Press the AV SV CV TV to select all of the available signal sources: “Video”, “S-Video”, “DVD” and “TV”. Changing the Position of the PIP Window When you press the Position button repeatedly, the PIP window moves from corner to corner on the TV screen.
C.TV mode Adjustment Adjustment the TV adjust settings: 1.Press the MENU button to display the main menu. 2.Press the ENTER button to enter Management Press the UP or DOWN button to select the Main Display (TV). VOL(-) PIP TV PC M Up VOL(+) Management Menu/Enter Title/Exit Main Display ( TV ) Down PIP Display Language Reset . ( Off ) ( No ) NTSC H ： 31.2 kHz V ： 50.2 Hz PC AV SV CV TV － ＋ 3.Press the VOL (+) or VOL (-) button to select TV source. 4.
5.Press the ENTER button to TV Setting. 6. Press the UP or DOWN button to select the desired item. 7. Press the VOL (+) or VOL (-) button to set the desire item. 8. Press the EXIT button to return to the previous screen or exit from the Menu. Special Sound Option: Choosing a Multi-Channel Sound (MTS) Soundtrack Depending or the particular program being broadcast, you can listen to stereo, mono, or a Separate Audio Program.
Adjusting the Picture settings: 1.Press the MENU button to display the main menu. 2. Press the ENTER button to enter Management Press the UP or DOWN button to select the Main Display (TV). VOL(-) Up VOL(+) Menu/Enter Title/Exit Down M TV Management Main Display PIP Display . Language Reset NTSC H ： 31.2 kHz V PC PIP PC AV SV ( ( TV ) Off ) ( No ) ： 50.2 Hz CV － TV ＋ 3. Press the VOL (+) or VOL (-) button to select TV source. 4.
6. Press the VOL (+) or VOL (-) button to set the desired item. Brightness － + Contrast － + Hue － + Saturation － + Sharpness － + 7. Press the EXIT button to return to the previous screen or exit from the Menu. Memorizing the Channel: Your TV can memorize and store all of the available channels for both standard broadcast (antenna) and cable channels. After the available channel are memorized, press the UP and Down button to scan through the channels.
TV M Management Main Display PIP Display . Language Reset NTSC H ： 31.2 kHz V PC PIP PC AV SV ( ( TV ) Off ) ( No ) ： 50.2 Hz CV TV － ＋ 3.Press the VOL (+) or VOL (-) button to select TV source than press the ENTER button. 4.Press the EXIT button to return to the previous screen Press the VOL(+) or VOL(-) button to select the TV Setting. Note: 1.ANT is standard broadcast television received through your antenna for channels 2-69 2.STD, IRC, and HRC are all formats of cable TV.
First, select the correct signal source (ANT, STD, IRC, HRC). See previous step. 1Press the MENU button to display the main menu. 2.Press the VOL(+) or VOL(-) button to select the TV VOL(-) Up VOL(+) Menu/Enter Title/Exit Down Setting. 3.Press the ENTER button to TV Setting. 4.Press the UP or DOWN button to select the Auto scan (Yes). TV PIP PC TV Setting ANT/CATV Autoscan Add/Erase Parent Control Caption Fine Tune -No － ( .. ( ( ANT ) Yes… ) Add ) ( Off ) ＋ Yes ＋ 5.
TV PC PIP TV Setting Number Buttons VOL(-) Up VOL(+) Menu/Enter Title/Exit Down ANT/CATV Autoscan Add/Erase Parent Control Caption Fine Tune -- ( Add ADD ERASE ( ANT ) .. ( Yes… ) ( Add ) Off ) ＋ Erase － ＋ 5.Press the VOL (+) or VOL (-) button to select Add/Erase than press the ENTER button. 6. You can use the ADD/ERASE button on the remote control to add/erase the channel directly. You can view any channel including an erased channel by using the number buttons on the remote control.
changes channel in sequence. You will see all the channels that have been memorized, (the TV must be memorized). You will not see channels that were either erased or not memorized. Number Buttons Return Up Title/Exit Down Directly Accessing Channel Using the Number buttons to watch a specific channel. For example, to select channel 27, press “2”then “7”. The TV will change channels. When you use the number buttons, you can select channels that were either erased or not memorized.
VOL(-) Up VOL(+) Menu/Enter Title/Exit Down Please Enter Pin : --- --- --- --5.The “Please Enter Pin” screen will appear, enter your 4-digit PIN number. For the initial setup, you must enter 1234 (initial code). 6.After entering a valid PIN number, the Parent Control screen will appear, Press the UP or DOWN button to select the “Change PIN”. TV PC PIP Parent Control Parent Control ( Off ) TV-Rating ( TV-G ) MAPP ( PG-13. ) Change Pin Please Enter New Pin : --- --- --- --- 7.
As soon as the 4-digits are entered, the “Change Pin OK!!” screen appears. Your PIN has been memorized. Press the EXIT button to exit. How to Enable / Disable the Parent Control 1. Press the MENU button to display the main menu. 2.Press the VOL (+) or VOL (-) button to select the VOL(-) Up VOL(+) Menu/Enter TV Setting. Title/Exit 3.Press the ENTER button to TV Setting. Down 4.Press the UP or DOWN button to select the Parent Control than press the ENTER button. 5.
How to Set up Restrictions Using the “TV Rating”: First, set up a personal identification number (PIN), and enable the Parent control. (See previous section). Parental restrictions can be set up using either of two methods: The TV Guidelines or MPAA rating. 1.Press the MENU button to display the main menu. 2.Press the VOL (+) or VOL (-) button to select the TV Setting. 3.Press the ENTER button to TV Setting. 4.Press the UP or DOWN button to select the Parent Control than press the ENTER button.
7.The “TV Rating ” screen will appear, press the UP or DOWN button to select a particular TV category. Press the Enter button to select “B”: Note 1: The Parental Control will automatically block certain categories that are “More restrictive”. For example, if you block “TV-GB ” then “TV-PG B”, “TV-14 B” and “TV-MA B” will automatically be blocked also. The Parental Control will automatically unblock certain categories that are “Less restrictive”.
“More restrictive”. For example, if you block: L” sub-rating in TV-PG, then the “L” sub-rating in TV-14 and TV-MA will automatically be blocked also. If the TV is turned to a restricted channel, the parent control will block it .The Screen will go blue and the following message will appear: “ Parent Control working Level: ” TV-G How to set up Restrictions using the MPAA Ratings: The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies.
TV PC PIP MAPP B/U G B PG B PG13 B R .B NC17 B X .. B 7.Press the UP or DOWN button to select a particular MPAA category. Press the Enter button to select “B”. G PG PG-13 R : General audience (no restrictions). : Parental guidance suggested. : Parents strongly cautioned. : Restricted. Children under 17 should be accompanied by an adult. NC-17 X : No Children : Adults only under 17. Note 1: The Parental Control will automatically block certain categories that are “More restrictive”.
“ Parent Control working Level: ” MPAA PG-13 Viewing Closed Captions: Your TV decodes and displays closed captions that are broadcast with certain TV shows. These captions are usually for the hearing impaired or foreign-language translations. All VCRs record closed caption signals from television programs, so home-recorded videotapes also provide closed captions. Most pre-recorded commercial videotapes provide closed captions as well.
6.Depending on the particular broadcast, it might be necessary to make changes to “Channels” and “Field”: To make the change follow the same procedure as in Steps 4~5 above. Different channels and fields display different information: Field 2 carries additional information that supplements the information in Field1. (For example, Channel 1 may have subtitles in English, while Channel 2 has subtitles in Spanish). D: AV/SV/CV mode Adjustment Adjustment the AV/SV/CV adjust settings: 1.
item. 6.Press the VOL (+) or VOL (-) button to set the desired item. 7.Press the EXIT button to return to the previous screen or exit from the Menu. NOTE: All the adjustment items in AV/SV/CV menu are described in TV mode menu, so you can refer to the TV mode adjustment. E. Other functions explained 1. Use “Channel up/down” as function keys. -When you press “Menu” to go into OSD, ”Ch up/down ”will become the up/down function control key. 2. To use “VOL (+) or VOL (-)” as the level control key.
If you continue to press “APC “ key you will see the display on the right upper screen to change to “ Normal”, “Clear”, “Dark” or “Theater”. For example, when the screen is showing a night scene or darker screen, you can use APC to change the screen to “Clear” and get a brighter picture. If the screen is too bright, you can use this APC key to change the screen to “normal” or “dark”. 5. MTS control key (multiple sources of sound).
OSD Language List English Main Display PIP Display Main PIP H. Position V. Position PIP Size Border Language Recall ANT/CATV Auto Scan Add/Erase Caption Parent Control Fine Tune Bass Treble Balance Sound Mute Brightness Contrast Hue Saturation Sharpness Color Temp. Warm Cool Neut.
French Affichage Pri. Affichage PIP Pri.ncipal PIP Position H. Position Taille Frontière Langue Rappel Ajout./Effac. Légende Commande V. ANT/CATV ISI Balayage Parent Feglaheimage Graves Aigus Balance Bruit Muet Luminosite Contraste Teinte Saturation Acuité Temp. Couleur Chaud Frais Neut. Util. R V B O Image Auto. Position H Position V Horloge Phase Ajou. Effa.
German HauptcAnzeige Anzeige PIP Haup.tsächlich PIP H. Position V. PIP Größe Rand Sprache Zurücksetzen ANT/CATV Autoscan ADD/Löschen Untertitel Eltern. Feineinstell. Baß Diskant Balance Ton Stummer Helligkeit Kontrast Farbton Sättigung Schärfe Farbe Temp. Warm Kühl Neut. Benu. R G B U Selbstbild H Position V Position Takt Fase ADD Lösc.
Spanish Pantalla Pri. Principal PIP Pri.ncipal PIP Posición H. Posición PIP Tamaño Frontera Lengua Restaurar ANT/CATV Exploración Agregue/Borre Subtítulo Control Padre Sintonizar Bajos Agudos Balance Sonido Silenciar Brillo Contraste Matiz Saturación Agudeza Temp. de Color Cálid Frío Neut. Usua. R V A D Imagen Auto Posición H Posición V. Reloj Fase Agre.
繁體中文 主畫面 子畫面 主畫面 子畫面 水平位置 垂直位置 子畫面比例 外框 語言 回復 無線/有線 頻道搜尋 增加/消除 關閉字幕 節目分級 微調 低音 高音 平衡 音源 靜音 亮度 對比 色調 色濃度 清晰度 色溫 暖色 冷色 自然 使用者 紅 綠 藍 自動調整 水平位置 垂直位置 時脈 相位 增加 消除 電視分級 電影分級 更新密碼 開啟 關閉 標準 全畫面 放大 廣視角 雙語 立體聲 單聲道 睡眠關閉 睡眠 30 明亮 標準 暗 劇院 音量 節電 頻率超過 尺寸超限 無訊號 訊號線未插 繁體中文 是 否 請輸入密碼 V-Chip 動作層次 EEPROM 初始 密碼錯誤再試一次 請輸入新密碼 48
Troubleshooting When there is no picture or sound • Make sure the AC adapter is properly inserted in the Power outlet. • Reception other than those of broadcasting stations can be considered. • Make sure the input mode is set to TV. • Make sure the main power switch of the main unit is on. When there is no picture from AV. • Make sure the BLACK LEVEL is properly adjusted. • The fluorescent lamp may have reached the end of service life. • Make sure the video I/P terminal is not free of connections.
When there picture is not clear. • The reception may be weak. • The state of the broadcast may also bad. • Make sure the antenna is not disconnected. When the picture is light or improperly tinted. • Check color adjustment. • Check color system setting. When there picture is too dark. • Press the Brightness button. • Check PICTURE and BLACK LEVEL adjustment. • The fluorescent lamp may have reached the end of service life. When there remote control does not work.
When the picture is not sharp. • The reception may be weak. • The state of the broadcast may also be bad. • Make sure the antenna is not disconnected. When ther picture moves. • The reception may be weak. • The state of the broadcast may also be bad. • Make sure the antenna is not disconnected. When the picture is doubled or tripled. • Make sure the antenna is facing the right direction. • There may be reflected electric waves from mountains or buildings. The picture is spotted.
When there are stripes on the screen or colors fade. • Is the unit receiving interference from other devices? • Transmission antennas of radio broadcasting station and transmission antennas of amateur radio and cellular phones may also cause interference. • Use the units as far apart as possible from device that may cause possible interference.
