V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Table of Contents Operating Safety ................................................................................................... 1 Connecting ............................................................................................................ 2 Power supply ................................................................................................. 2 English Before Getting Started ..............................................................
Sound Setting...................................................................................................... 26 Service in Analogue TV (ATV)............................................................................. 28 Service Management ................................................................................... 29 Rename........................................................................................................ 29 Child Lock in Analogue TV (ATV).................................
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Before Getting Started English Please read through this section carefully and follow the instructions to maximize the reliable operation and lifetime of your LCD display. Always keep these instructions handy and close by your LCD display. Keep the instructions and the packaging so that if you sell or give away your LCD display you can give them to the Français new owner.
Contact the Call Centre immediately in any of the following situations. Do NOT plug in or switch on your display: • If the power cable/power supply overheats or is damaged • If liquid is leaked into the monitor If the LCD display is dropped or the housing damaged • Connecting Observe the following instructions to connect your LCD display properly: Power supply • Do not open the power supply housing. An open housing presents a lethal hazard from electrical shock.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Additional Safety Instructions When using any electronic equipment, basic safety precautions should always be • Do not use this product including TV set and remote near water (e.g. near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a English taken. Following the guidelines below can reduce the risk of fire, electric shock and injury to person: instructions. Français swimming pool).
Introduction Thank you for purchasing our LCD display. We thank you for your confidence in our products and are pleased to greet you as a new customer. We focus on great features, ease of use and reliability in manufacturing your LCD display. Service Your display comes with a one-year warranty; this is in addition to your statutory rights. This manual contains a separate chapter on Troubleshooting on page 47.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Further Features ¾ The connection terminals include RF IN, D-SUB, DVI, HDMI, SCART 1 (CVBS, English RGB), SCART 2 (CVBS, S-VIDEO, RGB), COMPONENT, CVBS and S-VIDEO. ¾ Easy-to-use remote control, and OSD (On-Screen Display) menu. Français ¾ Experience PIP (Picture in Picture). ¾ ARC (Aspect Ratio Control) settings include Auto image, 4:3, 16:9, 14:9, Panorama, and Zoom. Italiano ¾ APC (Automatic Picture Control) settings include Normal, Cinema, and Dynamic.
Overview of the TV Indicator Indicator Indicator Lighting Status: OFF (No power input) Off Standby passive Red Power on (TV / Video / PC mode) Green Standby active (only available in PC mode) Amber A green indicator lights when the power is on and an amber indicator lights when in the standby PC mode. A red indicator lights when in standby mode passive.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Function Keys (on the display panel): EXIT / ARC • Select the TV display mode to switch Auto Image / Panorama / 16:9 / 14:9 / 4:3 / Zoom. • When in OSD (On-Screen Display)* menu, press EXIT / ARC to close the OSD menu - VOLUME + • Increase or decrease the volume. ▼CHANNEL▲ • Change channels. MENU • Display the OSD main menu. • Return to previous menu when in OSD menu.
Connections: Interface 1 & Interface 2 NOTE: Audio out L/R: The level of audio output cannot be changed using the volume control on your display. This connector should be used with an external audio amplifier that can be used to control the volume.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula REVEAL To display concealed information, such as solutions of riddles, puzzles, or a quiz. EXPAND Press “EXPAND” button to enlarge the top half or bottom half of the TELETEXT page. TIME/SUB-PAGE Press “TIME/SUB-PAGE” button to access to the sub-page you required. 4 5 6 7 8 9 Red / Green / Yellow / Blue ATV (analogue): To display recording setting and user profile Page direct access for Teletext mode. DTV (digital): Function keys for DTV mode.
10 ARC (Aspect Ratio Control) In VGA/DVI (PC) mode, to toggle the picture mode between 16:9 / 4:3. In Video mode, to toggle the picture mode between Auto Image / Panorama / 16:9 / 14:9 / 4:3 / Zoom 11 OK In OSD screen, to set up a function or enter a sub-menu. ▲/►/▼/◄ OSD screen in DTV (digital)/ ATV (analogue): to access menu items. 12 EXIT In OSD screen, to exit a menu or sub-menu. 13 MENU Display the On-Screen Display (OSD) menu or return to a layer of menu.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Setting Up Connecting video devices via AV cables Nederlands Español Deutsch Italiano This TV accepts different Video Inputs. Connecting to device connectors with better video quality will bring you better viewing enjoyment. The video quality sequence from the best to a normal one would be Component, SCART, S-VIDEO, and CVBS. Français English Connections NOTE: • ANT IN: Antenna (aerial) In.
Connecting a video device via HDMI - HDMI This can be applied only if there is an HDMI Output connector on the external device. NOTE: 12 • Video Device: DVD Player, Set-top Box, Game Box…etc. • HDMI: High-Definition Multimedia Interface • No audio cable is needed when via HDMI to HDMI connection.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Connecting a PC via DVI - DVI Nederlands Español Deutsch Italiano Français English This can be done if there is a DVI Output connector on the PC. NOTE: • To receive a display, connect a DVI-to-DVI cable between the DVI connector on the TV and the DVI connector on the PC. • To receive a sound, connect an audio cable between the PC AUDIO IN jack on the TV and AUDIO OUT jack on the PC. • Not all above connecting cables will be supplied.
Connecting a PC via VGA cable NOTE: 14 • To receive a display, connect a VGA cable between the D-SUB connector on the TV and the VGA connector on a PC. • To receive a sound, connect an audio cable between the PC AUDIO IN jack on the TV and AUDIO OUT jack on a PC. • Not all above connecting cables will be supplied.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Watching TV English Turning the LCD Display On and Off Turning On After the LCD DISPLAY is connected, you can then turn on your LCD DISPLAY. Français Follow the instructions below to turn the display on: Step 1: Place supplied two (AAA) batteries into the remote control; make sure the Deutsch Italiano batteries are oriented correctly.
Step 3. Press the POWER button on the right side of the display, or press the POWER button of the remote control to swift on the display. The indicator will light up green.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Turning Off Install menu will appear automatically on the screen. (Please ensure your TV has aerial cables connected.) The whole Auto Install process will take around 10 minutes to complete. 1. Press S or T to highlight Country* and then press 2. OK. Press W or X to choose your country in the Message Bar, then press OK. Press S or T to highlight Language*, then press OK to enter the Adjustment Bar. 4. Press W or X to choose your language. Press OK. 5.
Source Buttons 1. Turn on the power. 2. Select an input source as described below.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Volume Control English Using Volume Control Press VOL+ / VOL- to increase or decrease the sound volume. Français Using Mute At any time, users can temporarily turn off the sound by pressing the MUTE Press MUTE and the sound cuts off. 2. Press MUTE again or VOL+ / VOLto turn the sound back to the Deutsch 1. Italiano button. Setting the Sleep Timer You can set the Sleep Timer to turn off the TV automatically.
ARC - Aspect Ratio Control Press ARC to adjust different picture format on the screen. Please note: in some sources, some modes are only available. Auto Image : In this mode, the TV can automatically select the suitable broadcast mode. 4:3 : In this mode, will display traditional 4:3 broadcasts for non-wide screen in the correct proportions. There will be black strips at both sides of the screen. 14:9 : In this mode, will display 14:9 broadcasts in the correct proportions.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Picture in Picture (PIP) Functions Français English You can press the buttons on the remote to control the PIP functions. POSITION : Press the button to move the sub picture from corner to corner on the TV screen. Press repeatedly to change POSITION. SIZE : Press the button to select a size of the sub picture - Small / Middle / Large. Press repeatedly to change SIZE. Video : To interchange the picture of main source and sub source.
PIP mode This table shows what types of sources can work in main picture and PIP picture. “Main” means main source and “Sub” means sub source. The symbol “O” means both main source and sub source can operate.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula General Controls & Adjustment English How to control On-Screen Display (OSD) OSD main menu can appear by pressing buttons either on remote control or the You can use the remote control buttons to open the OSD main menu and change the settings for the TV. 2. You can also use the buttons of the display to open the OSD main menu and adjust different settings for your TV. Nederlands Español Deutsch Italiano 1. Français right side of the TV.
Viewing the On-Screen Display (OSD) Main menu Instruction The Instruction in the message bar is served as a reference, when you use the remote control to select your preferred item. Sub-menu Please press OK on the remote control, after selecting your preferred item in sub-menu. How to use main menu and sub menu in OSD 1. 2. 3. 4. 5. 6. 24 With the power on, press MENU on the remote. The OSD (On-Screen Display) main menu appears.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Picture Setting You may need to perform separate adjustments for brightness and contrast for the English different modes. With the power on, in any mode. 1. Press Source button to choose desired source. Français 2. Press MENU. 3. Press W or X to select “Video” and press T. 4. Press S or T to highlight one item. Press OK to enter the Sub-menu. 5. Press W or X to make adjustments in the adjustment bar Deutsch Italiano and press OK. 6.
Sound Setting With the power on, in any mode. 1. Press Source button to choose desired source. 2. Press MENU. 3. Press W or X to select “Audio” and press T. 4. Press S or T to highlight one item. Press OK to enter the Sub-menu. 5. Press W or X to make adjustments in the adjustment bar and press OK. 6. Press MENU to return to Main menu, or press EXIT to exit the menu. Audio: Main menu (Corresponding to step 2) Surround Modes : You can choose different audio effects for your TV.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula SRS WOW WOWTM The world's most popular complete audio enhancement solution that includes SRS English 3D, FOCUS and TruBass. SRS 3D® Retrieves the spatial information lost during compression and restores 3D sound Français field to any mono or stereo source over any pair of standard speakers or headphones.
Service in Analogue TV (ATV) With the power on, in Analogue TV mode. 1. Press TV of Source Button to select ATV mode. 2. Press MENU. 3. Press W or X to select “Service” and press T. 4. Press S or T to highlight one item. Press OK to enter the Sub-menu. 5. The operating screens will vary due to different functions; refer to the Message Bar below to adjust to your favourite settings. 6. Press OK to confirm your setting. 7. Press MENU to return to the previous menu or press EXIT to exit the menu.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Service Management Rename English With the power on, in Analogue TV mode. 1. Press TV to select ATV mode. 2. Press MENU. 3. Press W or X to select “Service” and press T. Français 4. Press S or T to highlight “Service Management”. Press OK to enter the Sub-menu. 5. Press T to highlight “Rename”. Press OK to enter the Service Naming. Italiano 6. In the Service Naming, press S or T to select the programme you want to rename, and then press OK to edit name.
Child Lock in Analogue TV (ATV) With the power on, in Analogue TV mode. 1. Press Source button to choose your desired source. 2. Press MENU. 3. Press W or X to select “Preferences” and press T. 4. Press S or T to highlight “Child Lock” and press OK. 5. Press W or X to change the current status. 6. Enter the PIN (Personal Identification Number) by using numeric buttons (0~9). To exit the menu, press EXIT.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Service in Digital TV (DTV) Step 2-7 3. Press W or X to select “Service” and press T. 4. Press S or T to highlight one item. Press OK to enter the Sub-menu. 5. The operating screens will vary due to different functions; refer to the Message Bar below to adjust to your favourite settings. 6. Press OK to confirm your setting. Deutsch 7. Press MENU to return to the previous menu or press EXIT to exit the menu. Service: Main menu Français 2. Press MENU.
Recording Setting Step 1 With the power on, in DTV mode. 1. Press Source button to choose desired source. 2. Press MENU. Step 2-5 3. Press W or X to select “Service” and press T. 4. Press S or T to highlight “Recording Setting*”. Press OK to enter the setting mode. 5. Press MENU to return to the previous menu or press EXIT to exit the menu.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Service Scan With the power on, in DTV mode. Step 1 English 1. Press TV on Source button to choose DTV source. 2. Press MENU. Français Step 2-8 3. Press W or X to select “Service” and press T. 4. Press S or T to highlight “Service Scan”. Press OK to enter the Sub-menu. 5. Press T to highlight “Country” and press OK. 6. Press W or X to choose the country and press OK. 7. Press T to highlight Confirm* and press OK.
Setup Step 1 With the power on, in DTV mode. 1. Press Source button to choose desired source. 2. Press MENU. 3. Press W or X to select “Service” and press T. 4. Press S or T to highlight “Setup”. Press OK to enter the setting mode. Step 2-5 5. Press MENU to return to the previous menu or press EXIT to exit the menu. Main menu Setup: Banner Display Time: Adjust the display time of the banner. Switch to 3 / 5 / 10 seconds Subtitle : Choose your preferred subtitle Language* language.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula New Service Alert With the power on, in DTV mode. 2. Press MENU. Step 2-6 3. Press W or X to select “Service” and press T. 4. Press S or T to highlight “New Service Alert”. Press OK to enter the setting mode. 5. Press W or X to select “On” or “Off” in the message bar and press OK to confirm. 6. Press MENU to return to the previous menu or press EXIT to exit the menu. Step 1 Deutsch Parental Control Français English 1.
Viewing the Banner of Digital TV With the power on, in DTV mode. (The banner will appear, after DTV Service Scan completes) 1. Press Source button to choose desired source. (see page 18) 2. Press ▼CH▲ / OK / S or T to display the banner. 3. The banner is on the screen, then: y Press S or T to select channel in the banner. y y Press OK to confirm the selected channel. Press the SUB-TITLE button to display the DTV SUBTITLE. y Press to display the more details information about the selected channel.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula EPG (Electronic Programme Guide) is only provided in Digital TV. Users can research, view, create or record a list of current and future broadcast television programmes. English EPG (Electronic Programme Guide) in DTV With the power on, in DTV mode. Français 1. Press Source button to choose desired source. 2. Press the GUIDE button on the remote to display the EPG. y y Press the BLUE button to switch to theme list.
Reset With the power on, in any mode 1. Press MENU. 2. Press W or X to select “Service” and press T. 3. Press S or T to highlight “Reset”. Press OK then finished. 4. If you want to exit the menu, press EXIT. Reset (in ATV mode) Reset (in DTV mode)* NOTE: Press T of your remote to enter the second page of main menu to select Reset.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Preferences With the power on, in any mode. Main menu (in ATV) Preferences: Child Lock and Change PIN are offered in ATV. Main menu (in DTV) Sub-menu OSD : To make adjustments for the OSD (On-Screen Display). Language : Select language display of the OSD. OSD Contrast : Adjusts the contrast of the OSD. OSD Brightness : Adjusts the brightness of the OSD. Transparency : Adjusts the transparency of the OSD. Return : Return to the previous menu.
On Timer With the power on, in any mode. 1. Press Source button to choose desired source. 2. Press MENU. 3. Press W or X to select “Preferences” and press T. 4. Press S or T to highlight “On Timer”. Press OK to enter the Sub-menu. 5. Press T to highlight “TV on after”. Press OK to set up time. 6. Enter desired hours/minutes* by using numeric buttons (0~9), press OK. 7. Press T to highlight “Confirm”, press OK, and then the TV will turn off immediately.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Connectivity: PC / SCART Setting With the power on, in VGA mode. 2. Press MENU. 3. Press W or X to select “Connectivity”. 4. Press T to highlight “PC”, and then press OK to enter the Sub-menu. 5. Press S or T to highlight one item. Press OK. 6. Press W or X to make adjustments, then press OK. Français English 1. Press PC/HD of source buttons to select VGA mode. 7.
Resolution Adjustment This message of your current PC resolutions and frequency appears, when PC is connected. With the power on, with PC connected. Press S or T in the remote control to highlight one item. Press OK in the remote control. Note: 1. The picture of “Wide mode selection” will appear in some specific PC resolutions of 1024x768, 1280x768 1360x768 and 640x350, 720x400. 2. Auto mode is strongly recommended.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Information With the power on, in any mode. English 1. Press Source button to choose desired source. 2. Press MENU. 3. Press W or X to select “Information”. You can also use the “SUB-TITLE” key on remote control to Italiano invoke the “Information.” Français 4. Press OK or MENU or EXIT to exit the menu. Panel Res. :Displays the panel resolution of the TV. Español Main Source :Displays the source of the main picture source.
TELETEXT TELETEXT is an information service broadcast offered by some TV stations (depending on different countries) which gives up-to-the-minute information, news, weather, television programs, share prices, subtitles, and so on. This TV has 100 Teletext page number memories. TELETEXT Operation Step1. Select a TV station on which TELETEXT is being transmitted. Step2. Press TELETEXT on the remote to make the TELETEXT screen appear.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula TELETEXT Page Selection Step1. Enter the required TELETEXT page as a three digit number. Display: The selected page number is displayed at the top left corner of the English screen. The TELETEXT page counter searches until the selected page number is located, so that the desired page is displayed on the screen. Step2. button can be used to select the preceding or Français The CHANNEL▼ /▲ or following page. Step3.
TIME Step1. While watching a TV program with TELETEXT transmission, press the button. The current time information will be displayed on the upper centre corner of the screen. Step2. The time information will disappear after pressing the button again. Sub-Page Press the button to stop the running teletext page and enter your subpage number.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Here are some tips to solve some common problems. If your problem still exists, please contact your nearby retailer directly. Make sure the input mode is set correctly. Italiano Make sure the power cord is properly connected. Español Deutsch Français There is no picture and sound. English Troubleshooting Make sure the Contrast/ Brightness is properly adjusted. Make sure all external devices are connected properly.
There is no picture or sound, just noise. The reception may be weak. Make sure the aerial is not disconnected. The picture is not clear. The reception may be weak. Make sure the aerial is not disconnected. The picture is too bright. Check Contrast/Brightness adjustment. Check the APC (Auto Picture Control) function setting. Check the APC function setting. Check Contrast/Brightness adjustment. Make sure the TV set isn’t near microwave oven or other equipment.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula Make sure the aerial is facing the right direction. There may be reflected signals from mountains or buildings. There may be interference from automobiles, trains, high voltage lines, neon lights, etc. Français English The picture has double or triple image. Deutsch Italiano The picture is spotty. Check the batteries in the remote control are not flat. Make sure the remote control sensor of TV set is not under strong lighting.
Safety and Regulatory Information Repair • Leave all repairs of your LCD display to authorised and qualified personnel only. • Should a repair be necessary, please contact one of our authorized service partners only. Notes for Service Engineers • Before opening the housing, disconnect the product from all power sources and remove any connecting cables. If the display has not been disconnected from the power outlet before being opened, there is a danger to life through electric shock.
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula 4 5 6 7 8 9 10 25.175 800 640 48 96 449 350 60 2 31.469 59.941 - 25.175 800 640 48 96 525 480 33 2 35.16 56.25 + + 36.0 1024 800 128 72 625 600 22 2 37.879 60.317 + + 40.0 1056 800 88 128 628 600 23 4 48.363 60.004 - 65.0 1344 1024 160 136 806 768 29 6 56.476 70.069 - 75.0 1328 1024 144 136 806 768 29 6 35.0 66.667 31.469 70.087 47.73 60 47.7 60 + + + + 30.24 864 640 96 64 525 480 39 3 28.
Specifications Model V42MAGI Screen Size (diagonal) 42" Audio Output 15W x 2 Aspect Ratio 16:9 TV System PAL / SECAM / DVB-T Video Playback PAL / SECAM / NTSC Sound System NICAM A2 (IGR) / PCM Panel Resolution 1366 x 768 (WXGA) @ 60Hz Interface 1 (Side) HDMI, DVI-D, D-SUB, PC AUDIO IN Audio & Video In (S-Video, Component, Composite, Audio L/R), Antenna In, Connectivity Interface 2 (Rear) SCART 1, SCART 2 Audio & Video Out (Video, Subwoofer, Audio) Digital Audio Out Common Interface 100 pag
