Operation Manual

25
English Français Italiano
Deutsch
Español
Nederlands
V42MAGI-EE1-01EN 10/26/2006_ver.a-PD.paula
Picture Setting
You may need to perform separate adjustments for brightness and contrast for the
different modes.
With the power on, in any mode.
1. Press Source button to choose desired source.
2. Press MENU.
3. Press W or X to select “Video” and press T.
4. Press S or T to highlight one item. Press OK to enter the
Sub-menu.
5. Press W or X to make adjustments in the adjustment bar
and press OK.
6. Press MENU to return to the main menu, or press EXIT to
exit the menu.
Video:
Backlight : Adjust the backlight level of the screen.
Contrast : Increase and decrease the picture
contrast.
Brightness :
Darken and brighten the picture
brightness.
Colour : Deepen and lighten the picture colours.
Sharpness :
Adjust the outline of pictures to make
them more sharper or duller.
Tint* :
For skin tones to become purplish or
greenish. (Only available when the
video input is in NTSC format.)
Main menu
(Corresponding to step 3)
Adjustment Bar
(Corresponding to step 5)
Noise
Reduction
Decrease the picture noise in a weak
signal. Switch to Auto / High / Mid / Low
/ Off.
NOTE:
It is best viewed with lower brightness and contrast settings in VGA or DVI mode.