Operation Manual

28
Service in Analogue TV (ATV)
With the power on, in Analogue TV mode.
1. Press TV of Source Button to select ATV mode.
2. Press MENU.
3. Press W or X to select “Service” and press T.
4. Press S or T to highlight one item. Press OK to enter the
Sub-menu.
5. The operating screens will vary due to different functions;
refer to the Message Bar below to adjust to your favourite
settings.
6. Press OK to confirm your setting.
7. Press MENU to return to the previous menu or press EXIT
to exit the menu.
Service:
A.P.S. and Service Management are only offered in ATV mode.
A.P.S. : This function is to search and store all
available channels.
Country
: Choose a country.
Start Service Scan : Start scanning all channels.
Sub-menu
Return : Return to the previous menu.
Service
Management
:
Manage the channels to your own
preferences.
Sort :
Set the channel order according to
your preference.
Delete : Delete the selected channel.
Rename : Rename the selected channel.
Add/Change : Add or fine tune a selected channel.
Sub-menu
Return : Return to the previous menu.
Main menu
Sub-menu
Service list
Reset :
You can reset all settings to their
original default settings, except the
scanned channels.
NOTE:
Please refer to an example for the Rename function of Service Management in page 29.