Instructions for use
switch itself on again, disconnect it from the 
mains supply, and wait for approximately 15 
minutes before reconnecting. If the machine 
does not start again seek authorised technical 
assistance.
 Cleaning
- Disconnect the appliance from the mains 
and allow it to cool before undertaking any 
cleaning task. 
- Clean the equipment with a damp cloth with 
a few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an 
acid or base pH such as bleach, or abrasive 
products, for cleaning the appliance.
- Never submerge the appliance in water 
or any other liquid or place it under running 
water.
- During the cleaning process, take special 
care with the blades, as they are very sharp.
- It is advisable to clean the appliance 
regularly and remove any food remains.
- If the appliance is not in good condition 
of cleanliness, its surface may degrade 
and inexorably affect the duration of the 
appliance’s useful life and could become 
unsafe to use.
- The following pieces may be washed in a 
dishwasher:
  - Liquidiser attachment
  - Whisk 
  - Goblet
  - Sieve
  - Chopping container
- The draining/drying position of the articles 
washable in the dishwasher or in the sink 
unit and then remove the whisk accessory by 
pulling it outwards. (Fig. 4).
- Note 1: Do not work at high speeds with 
this accessory attached, as this would cause 
defects in the whisk (spinning its wires).
- Note 2: To free the whisk (F) from the 
adapter tting (E), pull the ring on the whisk.
Sieve accessory (Fig. 5):
- This accessory is used for making juices, 
stock…
- Place the sieve in the jug and add the foods 
to be processed (Fig. 5). 
- Switch the appliance on with its foot 
attached and work with the food to be 
processed. The juice will go into the jug, but 
the pips, skin and thick pulp will remain in the 
sieve container (Fig. 5).
Mixing container (Fig. 6):
- This accessory is used for processing 
milkshakes, cold soups, vegetables…
- Place the foods to be processed in the 
mixing container with its blades in position 
and t the cover rmly (Fig. 6).
- Attach the whisk accessory to the lid by 
turning to the left, and start up the appliance. 
(Warning: Do not start up the appliance if 
the entire unit is not correctly in place and 
attached.) (Fig. 6)
- Stop the appliance when the food reaches 
the desired texture.
- Remove the lid tment by turning it to the 
right. (Fig. 6)
Safety thermal protector:
- The appliance has a safety device, which 
protects the appliance from overheating.
- If the appliance turns itself off and does not 










