Manual

POSITION FOR TARGET SHOOTING
Take such stance that your body faces the target at a 90 degree angle. Keep
your feet 1 ft. to 1-1/2 ft. apart. Raise your arm so that it lines up naturally
with the target. Your head should be turned as needed, so to have a good
sight picture. When you are in a correct position, aim the firearm and
squeeze the trigger.
AIMING
Align the rear and front sights carefully. The top of the front sight must be
leveled with the top of the rear sight and set in the middle of the rear sight
notch. The bullseye should rest on the top of the sights.
SQUEEZE OF THE TRIGGER
Squeeze the trigger very carefully with index-finger, keeping sight aligned
with the target. If the trigger is jerked, the target will possibly be missed due
to the movement of the firearm. The pressure should be applied between the
tip and the first joint of the finger. Press slowly and carefully. More speed will
be gained with practice.
ADJUSTING THE SIGHTS
Adjustable Sight Models Only
To raise the rear sight, turn the elevation adjusting screw counterclockwise.
To lower the rear sight turn the screw clockwise. When raising the sight the
point of impact rises. Lowering the sight, the point is lowered. The rear sight
can also be adjusted for windage. Turn the windage adjusting screw
clockwise to move the notch to right side, and counter-clockwise to move the
notch to left side.
10
ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION.