Manual

On Models 58, 111,132, 138,140, 145, 908, 911, 938, 940, 945 and 957 there
is no locking block. Remove spring and guide and then barrel from slide.
ATTENTION: No further disassembly is recommended unless done by a
skilled gunsmith.
FIELD STRIPPING PT111, PT111Ti, PT132, PT138, PT14O,
PT145 & PT145Ti
NOTICE: Some newer model pistols feature a takedown pin rather than a
disassembly latch. Instructions for the pin, where these instructions differ, are in
blue.
1. Remove the MAGAZINE by pressing
the MAGAZINE RELEASE BUTTON;
be sure that the chamber is EMPTY.
2. Pull SLIDE fully to the rear and push
up the SLIDE CATCH LEVER.
3. With left thumb, rotate SLIDE
DISASSEMBLY LATCH clockwise until
it stops.
Use the key for your Taurus Security
System to gently push the pin from the
right side of the pistol.
23
ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION.
5. Press LOCKING BLOCK
PLUNGER (PT-92 C-D, PT-92AF-D,
PT-99 AF-D, PT-100 AF-D AND PT-
101 AF-D)
6. Remove the BARREL from the
SLIDE.