Manual

4. With left hand, pull SLIDE
DISASSEMBLY LATCH or TAKE-
DOWN PIN out of frame.
5. Carefully release SLIDE CATCH,
and with SLIDE under full control, pull
SLIDE forward off of frame.
6. Carefully remove SLIDE SPRING
and GUIDE from its position on the
bottom of the BARREL. SPRING is
under compression so it must be kept
under control until removed.
7. Remove BARREL from SLIDE by
pulling to the rear and up.
ATTENTION: No further disassembly is
recommended unless done by a skilled
gunsmith.
24
ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION.
If the slide sticks on the frame, be sure the
chamber is empty and firmly pull the trigger
fully to the rear while pulling the slide forward
off the frame.
If the slide does not move because the barrel
remains to the rear and tilted upward, be sure
the chamber is empty and push the muzzle
against the palm of one hand while pushing
the slide forward with the other.