Manual

2626

PT 24/7 OSSPT 24/7 OSS

ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION AND FINGER OFF THE TRIGGER.

ASSEMBLY

In order to reassemble the pistol, proceed by reversing the disassembling

procedure while observing the following details:

1. Replace the barrel in the slide pushing it

to the rearward position. Insert the

spring/guide rod sub-assembly into the

slide over the barrel, compressing the

spring slightly to get it into position.

2. The SLIDE should be mounted on the

frame and pulled fully to the rear and the

SLIDE CATCH must be moved upward to

hold the SLIDE to the rear.

3. When reinstalling the SLIDE

DISASSEMBLY LATCH, it is inserted into the

frame with the lever pointing rearward and

the horizontal round portion of the latch

must engage the mating surface on the

bottom of the BARREL. Insert the take down

pin once the slide is in position to line up

the barrel with the hole and gently push in.

A click will indicate the pin is secured in

place.

4. The SLIDE CATCH then can be depressed

which allows the SLIDE to go forward.

5. You should cycle the SLIDE several times,

with no magazine inserted and no rounds

in the chamber, to insure that the barrel /

slide / frame relationship is correct.

1b 1c