Use and Care Manual

6 7

Using Your Personal Blender

Place the Sport Bottle on a at surface, open the bottle.

Fill the Sport Bottle with your favorite ingredients, all the ingredients must not

exceed the MAX Fill Line.

Fasten the Blade Base on the open end of the bottle by turning clockwise.

Turn the assembled Sport Bottle and Blade Base upside down and line up the

Micro Switch Tab on the Sport Bottle with the micro switch on the Blender Base.

Press the Sport Bottle down in the Blender Base to start blending.

To lock the Sport Bottle in the Blender Base for hands-free operation, press the

bottle down over the micro switch and turn the bottle clockwise in the Blender

Base.

Either stop pressing the Sport Bottle down or unlock the bottle from the Blender

Base, the blender will stop.

Turn Sport Bottle over and place on a at surface, take off the Blade Base, put

the Drinking Lid on.

CAUTION: Blades are sharp, handle carefully.

Helpful Hints

The appliance may only be used for a maximum 3 minutes of continuous

operation. Allow to cool down between uses.

This appliance is not intended to crush ice or frozen food.

Use only for liquid and soft fruit. Hard fruit should not be used and soft fruits cut

before use.

When overloaded, motor will automatically stop, please unplug, empty Sport

Bottle, wait for 15 minutes to cool down motor, start again.

・