Models BC10/BW11 Razzle Blender Operating Instructions 052544- M 2/1/01
Complete this page for quick reference when service is required: Taylor Distributor: Address: Phone: Service: Parts: Date of Installation: Information found on the data label: Model Number: Serial Number: Electrical Specs: Voltage Cycle Phase Maximum Fuse Size: A Minimum Wire Ampacity: A E February, 2001 Taylor All rights reserved. 052544--M The word Taylor and the Crown design are registered trademarks in the United States of America and certain other countries. Taylor Company 750 N.
Table of Contents ______________________________________________________________________________ Section 1 To the Installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Foot Pedal Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 2 To the Operator . . . . . . . . . . . . . . . .
Notes: Table of Contents Models BC10/BW11
Section 1 To the Installer This machine is designed for indoor use only. In all other areas of the world, equipment should be installed in accordance with the existing local codes. Please contact your local authorities. DO NOT install the machine in an area where a water jet could be used to clean or rinse the machine. Failure to follow this instruction may result in serious electrical shock.
Section 2 To the Operator The mixer you have purchased has been carefully engineered and manufactured to give you dependable operation. Mixing various candies, cookies, fruits, nuts, liquid flavors, and other food items into ice cream or frozen yogurt has made unlimited flavor combinations and product textures available. Warranty on Taylor Blenders Caution: This warranty is valid only if required exchanges are provided by an authorized Taylor Distributor.
Section 3 Safety We at Taylor Company are concerned about the safety of the operator when he or she comes in contact with the blender and its parts. Taylor has gone to extreme efforts to provide built-in safety features to protect both you and the service technician. As an example, warning labels have been attached to the unit to further point out safety precautions to the operator. DO NOT use a water jet to clean or rinse this unit.
WARNING! Make sure the mixer is level and sitting or mounted solidly on a sturdy surface during operation. Failure to comply may result in personal injury or equipment damage. Some consumers are highly allergic to peanuts, peanut oil, and peanut dust. In some severe cases, peanut allergy reactions can cause death. When blending product with peanuts, make sure excess product is cleaned from the agitator shaft to eliminate the fear of product carryover.
Notes: Models BC10/BW11 5 Safety
Section 4 Operator Parts Identification BC10 Operator Parts Identification 6 Models BC10/BW11
BC10 Exploded View Parts Identification ITEM DESCRIPTION PART NO. 1 CAP-MIXER 051484 2 SCREW-MIXER-RETAINER CAP 051487 3 BRAKE (SEAL) MIXER 051485 MOTOR-MIXER (120V) 051481-12 4 MOTOR-MIXER (220/240V) 051481-27 4a PLATE-MOTOR MOUNTING TOP 051481-4 4b BEARING-MIXER MOTOR 051481-2 4c ITEM DESCRIPTION PART NO. 10b* SWITCH-PRESS.
BW11 Operator Parts Identification 8 Models BC10/BW11
BW11 Exploded View Parts Identification ITEM DESCRIPTION PART NO. 1 COVER-MIXER-TOP WALL MT 051516 2 FASTENER-MIXER (BASE & CVR) 051515 3 BRAKE (SEAL) MIXER 051485 4 4a MOTOR-MIXER (120V) 051481-12 MOTOR-MIXER (220/240V) 051481-27 PLATE-MOTOR MTG TOP 051481-4 ITEM DESCRIPTION PART NO.
Accessories ITEM DESCRIPTION PART NO. ITEM DESCRIPTION PART NO. 1 ORGANIZER A.-FLURRY CUP/LID X52080 3 LID RAZZLE-CLEAR DOME 1000/CS 051969 1a INSERT-SPOON BIN 052113 4 COLLAR-BLUE PLASTIC 051750 1b COLUMN-LID 052084 5 LIMITER-CUP-STD. MIXER 051526 1c SCREW-1/4-15 X 1 HEX HEAD 052139 6 KIT-DRIP PAN (BW11) 052429 RAZZLE CUP 12 OZ.
Optional Dispensers X52037-- 1 Item Description Part No. Dispenser A.-2 Large - 2 Small X52037-1 1 Bracket A.-Wall Mount X52035 2 Canister A.-Large (2) X53638-1 3 Canister A.-Small (2) X53638-2 4 Kit A.-Dispenser-Wall Mount X52039 4a Screw-10-24 x 2 Sltd Pan Hd SS 051443 4b Anchor-Toggle Wing Zinc Plated 051444 4c* Template-Dispenser-Wall Mount 052041-T *Not Shown X52037-- 2 Item Description Part No. Dispenser A.-4 Small (Wall Mt.) X52037-2 1 Bracket A.
Optional Dispensers (Cont’d.) X52037-- 4 Item Description Part No. Dispenser A.-4 Small (Wall Mt.) X52037-4 1 Bracket A.-Wall Mount X52035 2 Canister A.-Small (4) X53638-4 3 Kit A.-Dispenser-Wall Mount X52039 3a Screw-10-24 x 2 Sltd Pan Hd SS 051443 3b Anchor-Toggle Wing Zinc Plated 051444 3c* Template-Dispenser-Wall Mount 052041-T *Not Shown X52078-- 1 Item Description Part No. Dispenser A.--2 Small (Wall/Counter Mount) X52078--1 1 Bracket A.--Wall/Counter Mt.
Optional Dispensers (Cont’d.) X52078-- 2 Item Description Part No. Dispenser A.-2 Large (Wall/Counter Mount) X52078-2 1 Bracket A.-Wall/Counter Mt. X51414 2 Canister A.-Large (2) X53638-1 3 Kit A.-Dispenser-Wall/Counter Mt. X51441 3a Screw--10--24 x 2 Sltd Pan Hd (3) 051443 3b Anchor--Toggle Wing Zinc (3) 051444 3c* Template--Dispenser--Wall Mt. 051415--T *Not Shown X52566-- 1 Item Description Part No. Dispenser A.
Optional Dispensers (Cont’d.) X52566-- 2 Item Description Part No. Dispenser A.-4 Small (Hood/Counter/Wall Mount) X52566-2 1 Bracket A.-Hood Mount X52559 2 Bracket A.-Splitback (2) X52556 3 Bracket A.-Counter/Wall Mt (2) X52618 4 Canister A.-Small (4) X53638-2 5 Tray A.-Hood Mount (2) X53773 6 Kit A.
Optional Dispensers (Cont’d.) X52566-- 5 Item Description Part No. Dispenser A.-2 Large (Hood Mount Only) X52566-5 1 Canister A.-Large (2) X53638-1 2 Bracket A.-Splitback (1) X52556 3 Bracket A.-Hood Mount X52559 4 Kit A.-Dispenser-Counter/Wall Mt X52567-4 4a Screw-10-32 x 1/2 Oval Hd (8) 001251 4b Collar-Holding (8) 046551 5 Tray A.-Hood Mount X53773 6* Instruction-Dispenser X52566-INS *Not Shown X52566-- 6 Item Description Part No. Dispenser A.-2 Large (Without Hood Mt.
Optional Dispensers (Cont’d.) X53492-- 1 Item Description Part No. Dispenser A.-1 Large - Vertical (Wall Mount Only) X53492-1 1 Canister A.-Large (1) X53638-1 2 Bracket A.-Vertical Wall Mount X53488 3 Kit A.-Dispenser-Wall Mount X53490 3a Screw-10-24 x 2 Sldt Pan Hd (3) 051443 3b Anchor-Toggle Wing Zinc (3) 051444 3c* Template-Single Canister-Wall Mt 053491-T *Not Shown X53492-- 2 Item Description Part No. Dispenser A.
Optional Large Candy Dispenser Canister Assembly (X53638--1) ITEM DESCRIPTION PART NO. ITEM DESCRIPTION PART NO. 1 CANISTER A.-LARGE CANDY DISP. X53638-1 1d PUCK A.-CANDY DISPENSER X52027 1a COVER-CANDY DISPENSER-LARGE 052032-1 1e CANISTER-CANDY DISPENSER-LG. 052033-1 1b SHAFT A.-LONG W/AGITATORS X53530-1 1f KNOB A.-CANDY DISPENSER X51564 1c PLATE--ANTI--ROTATION INS.
Optional Small Candy Dispenser Canister Assembly (X53638--2) ITEM DESCRIPTION PART NO. ITEM DESCRIPTION PART NO. 2 CANISTER A.-SM. CANDY DISP. (2) X53638-2 2d PUCK A.-CANDY DISPENSER X52027 2a COVER-CANDY DISPENSER- SMALL 052032-2 2e CANISTER-CANDY DISPENSER- SM. 052033-2 2b SHAFT A.-SHORT W/AGITATORS X53530-2 2f KNOB A.-CANDY DISPENSER X51564 2c PLATE--ANTI--ROTATION INS.
Section 5 Important: To the Operator Control Switch Reset Switch When placed in the “ON” position, the agitator activates to blend product. The reset switch is located above the control switch on the front panel. The reset switch protects the motor from an overload condition. If an overload occurs, the reset mechanism will trip. To properly reset the unit, make sure the control switch is in the “OFF” position. Press the reset switch and resume operation.
Motor S The motor features a heavy duty, ball bearing induction motor and does not use brushes, belts, couplings, or gears. This design reduces power consumption, heat, noise, and wear. The motor maintains an optimal speed of 3,485 RPM to maintain product consistency. S S Permanent Agitator The permanent agitator is manufactured from FDA and NSF approved, food safe material. The shaft must be cleaned between servings as product carryover will occur. (See page 23.
Section 6 Operating Procedures Mixing Instructions Step 2 Add “mix-in” ingredients such as liquid flavoring, candy, cookies, fruit, or other condiments. Make sure your hands are clean and sanitized before performing these steps. Step 1 Fill a serving cup with soft serve product and install the plastic domed lid. Figure 8 Step 3 Place the control switch in the “ON” position. Step 4 Hold the cup securely in place beneath the agitator, and step on the foot pedal.
Cleaning CAUTION: The permanent agitator is designed to withstand reasonable contact with the spinning agitator shaft. However, it should not be forced or held solidly against the side or bottom of the cup. This may cause damage to the cup or components. The Taylor Company recommends daily cleaning. ALWAYS FOLLOW LOCAL HEALTH CODES Step 5 After about 10 seconds have elapsed, slowly remove the cup by “swirling” it around the agitator.
Step 10 Wash all plastic parts in the approved cleaning solution. CAUTION: PLASTIC PARTS ARE NOT DISHWASHER SAFE! HAND WASH ONLY! CAUTION: The foot pedal should be kept dry. Do not leave it on the floor during mopping. Failure to comply may result in electrical shock. Step 11 Re-assemble the dispenser. Make sure the dispensing puck is placed in the canister with the counterbore face down and with the threaded insert facing the slot.
Parts List AGITATOR-MIXER-PERM SOFT SERVE AGITATOR-MIXER-PERM HARD SERVE BASE-MIXER-WALL MOUNT BRAKE (SEAL) MIXER BREAKER-CIRCUIT-3 AMP (120V) BREAKER-CIRCUIT-5 AMP (220/240V) BUMPER-TRAVEL ROD BUSHING-TRAVEL ROD CAP-MIXER CAP-CRIMP-MIXER CAPACITOR-MIXER (120V) CAPACITOR-MIXER (220/240V) CORD-MIXER-18/3 GROUNDED COVER-MIXER-TOP-WALL MOUNT FASTENER-MIXER FOOT A.
+ Available Separately Models BC10/BW11 25 Parts List PEDAL-FOOT-MIXER-115 VOLT TRANSMITTER-FOOT PEDAL CONTROLLER-FOOT PEDAL-115VOLT TUBE-AIR-FOOT PEDAL PEDAL-FOOT-MIXER-220 VOLT TRANSMITTER-FOOT PEDAL SWITCH-PRESSURE-220V TUBE-AIR-FOOT PEDAL PIN-PIVOT RELIEF STRAIN-MIXER-WALL MOUNT RELIEF STRAIN-MIXER-RIGHT ANGLE ROD-TRAVEL SCREW-MIXER-RETAINER CAP SCREW-MIXER-MOUNTING PIVOT PIN SCREW-MIXER-MOTOR MOUNTING SHAFT-MIXER-AGITATOR EXTENSION SHAFT-MIXER-AGITATOR EXTENSION SPACER-TUBE-12 OZ CUP SLINGER-MIXER
+ Available Separately Parts List 26 Models BC10/BW11 X52037-1 X52035 X53638-1 052033-1 052032-1 X51564 051412 051413 053581 X52027 X53530-1 X53638-2 052033-2 052032-2 X51564 053581 X52027 X53530-2 X52039 051444 051443 052041-T X52037-2 X52035 X53638-2 X52039 X52037-3 X52035 X53638-3 052033-1 052032-1 X51564 053582 X51404 X53530-1 DISPENSER A.-4 SMALL CAN. BRACKET A.-CANDY DISP.WALL MNT CANISTER A.-SMALL CANDY DISP KIT A.-DISPENSER WALL MOUNT DISPENSER A.-2 LG/ 2SM*LG PUCKS BRACKET A.-CANDY DISP.
+ Available Separately Models BC10/BW11 27 Parts List X52037-4 X52035 X52039 X53638-4 X52078-1 X51414 X53638-2 X51441 051444 051443 051415-T X52078-2 X51414 X53638-1 X51441 X52566-1 X52556 X52559 X53638-1 X53638-2 X52566-INS X52567 001251 046551 051443 051444 X52618 DISPENSER A.-2 SMALL CAN. BRACKET A.-2 CANISTERS CANISTER A.-SMALL CANDY DISP. KIT A.-DISPENSER-2 CANISTER MOUNT ANCHOR-TOGGLE WING ZINC PLAT SCREW-10-24X2 SLTD PAN HD SS TEMPLATE-DISP. WALL MOUNT DISPENSER A.-2 LARGE CAN. BRACKET A.
+ Available Separately Parts List 28 Models BC10/BW11 X52566-2 X52556 X52559 X53638-2 X52566-INS X52567 X53773 X52566-3 X52556 X52559 X53638-1 X52566-INS X52567 X53773 X52566-4 X52556 X52559 X52567-4 001251 046551 X53773 X52566-5 X52556 X52559 X53638-1 X52566-INS X52567-4 X53773 X52566-6 X52556 X53638-1 X52566-INS DISPENSER A.-HOOD MNT. 4 LARGE BRACKET A.-SPLITBACK DISPENSER BRACKET A.-HOOD*8634*8784* CANISTER A.-LARGE CANDY DISP INSTRUCTION-CANDY DISPENSER KIT A.-HOOD/COUNTER/WALL MNT TRAY A.
+ Available Separately Models BC10/BW11 29 Parts List X53407-1 X53460 X53638-2 X53461 X53492-1 X53448 X53638-1 X53490 001251 046551 X53492-2 X53448 X53638-2 X53490 DISPENSER A.-2 SMALL*VERTICAL BRACKET A.-2 VERTICAL WALL MNT CANISTER A.-SMALL CANDY DISP KIT A. 2 VERTICAL WALL MOUNT DISPENSER A.- LG - SNGL WALL MNT BRACKET A.-SINGLE CAN. WALL MNT CANISTER A.-LARGE CANDY DISP KIT A.- SINGLE CAN. WALL MOUNT SCREW-10-32X1/2 OVAL HD-NP COLLAR-HOLDING DISPENSER A.- SM - SNGL WALL MNT BRACKET A.-SINGLE CAN.
Wiring Diagram Wiring Diagram 30 Models BC10/BW11
