MSDS

MSPlus Advance Wood Flooring Adhesive 4-gal.
PRODUCT NAME:
MSPlus Advance Wood Flooring Adhesive
REVISION DATE:
07/18/12
(Continued)
Page 2
ITEM NUMBER:
ITEM DESCRIPTION:
MSPLUS-4
UNUSUAL FIRE AND EXPLOSION HAZARDS: NONE KNOWN
SECTION V HEALTH HAZARD IDENTIFICATION
SYMPTOMS OF OVER EXPOSURE:
INHALATION:MAY CAUSE SLIGHT IRRITATION TO THE UPPER RESPIRATORY TRACT.
EYES:VAPOR MAY CAUSE IRRITATION.
SKIN:MAY CAUSE SLIGHT SKIN IRRITATION.
INGESTION: NOT A LIKELY ROUTE OF ENTRY UNDER PROPER HANDLING CONDITIONS. MAY CAUSE
VOMITING. SYMPTOMS MAY BE SAME AS INHALATION.
HEALTH EFFECTS OR RISK FROM EXPOSURE:
ACUTE: INHALATION MAY CAUSE RESPIRATORY TRACT IRRITATION. CONTACT WITH EYES AND SKIN MAY
RESULT TO IRRITATION. INGESTION MAY RESULT TO GASTRIC DISTURBANCES.
CHRONIC: NOT KNOWN
SECTION VI FIRST AID PROCEDURES
FIRST AID PROCEDURES:
EYES CONTACT: WASH WITH WATER AT LEAST 15 MINUTES. IF IRRITATIONS PERSISTS, SEEK MEDICAL
ATTENTION.
SKIN CONTACT: REMOVE FROM SKIN AND WASH WITH SOAP AND WATER. IF IRRITATIONS PERSISTS, SEEK
MEDICAL ATTENTION.
INHALATION: MOVE TO FRESH AIR. ADMINISTER OXYGEN,IF NECESSARY. SEEK MEDICAL ATTENTION.
INGESTION: IF SWALLOWED, CALL PHYSICIAN.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: NONE KNOWN
SECTION VII HANDLING AND STORAGE
KEEP OUT OF THE REACH OF CHILDREN. DO NOT INDUCE VOMITING IF INGESTED.PROTECT FROM EXTREME
TEMPERATURE CONDITIONS. AVOID BREATHING BUILD-UP OF VAPORS. USE WITH ADEQUATE
VENTILATION.
PROTECT AGAINST PHYSICAL DAMAGE. STORE IN A COOL DRY PLACE (50 - 90 DEGREES F).
KEEP AWAY FROM HEAT AND SPARKS. KEEP FROM FREEZING.
SECTION VIII SPECIAL PROTECTION INFORMATION
VENTILATION AND ENGINEERING CONTROLS: USE LOCAL EXHAUST. DO NOT USE CLOSED
AIR-CIRCULATING SYSTEM. OPEN WINDOWS AND DOORS IF NECESSARY.
RESPIRATORY PROTECTION: NIOSH RESPIRATOR IF NEEDED.
CLOTHING: CHEMICAL RESISTANT GLOVES, APRON, COVERALLS, AND BOOTS AS NECESSARY TO PREVENT
CONTACT.
EYE PROTECTION: CHEMICAL GOGGLES OR FACE SHIELD
OTHER CLOTHING AND EQUIPMENT: IF CLOTHING BECOMES CONTAMINATED, REMOVE AND CLEAN BEFORE
REWEARING.
WORK PRACTICES, HYGIENIC PRACTICES: FOLLOW LABEL INSTRUCTIONS.
PROTECTIVE MEASURES DURING MAINTENANCE OF CONTAMINATED EQUIPMENT: USE GOGGLES AND GLOVES
WHEN CLEANING ADHESIVE FROM EQUIPMENT. MAINTAIN PROPER VENTILATION.