User's Manual

Model 142Important: To the Operator

Section 5 Important: To the Operator

Figure 1

ITEM DESCRIPTION

1 Power Switch

2 Indicator Light - MIX LOW

3 Standby Switch

Symbol Definitions

To better communicate in the International arena, the

words on many of our operator switches and buttons

have symbols to indicate their functions. Your Taylor

equipment is designed with these International

symbols.

The following chart identifies the symbol definitions

used on the operator switches.

=ON/AUTO

=OFF

= WASH

Power Switch

The center position is the OFF position. The left

position is W ASH which activates the beater motor

only. The right position is the AUTO position, which

activates the beater motor and the refrigeration.

Indicator Light - MIX LOW

A mix level indicating light is located on the front of the

machine. When the light is on, it indicates that the mix

hopper has a low supply of mix. The hopper should be

refilled immediately. Always maintain at least 2” (5.1

cm.) of mix in the hopper. If mix is not added to the

hopper, the freezing cylinder may freeze. This will

cause damage to the beater assembly and to the

freezer door.