Use and Care Manual

10
OPERATION INSTRUCTIONS
Controls
After plugging the wine cooler into a wall outlet, the cooler would turn on automatically and the
LCD screen would show the temperature inside of the cooler.
After setting your desired serving temperature, allow the cooler to cool down for 3 to 4 hours
before placing wine bottles in the wine cooler.
Temperature setting range：5-18ºC (40-65ºF)
Press once to turn the interior light ON or OFF.
Adjusts the temperature in 1 degree increments or decrements
Press to begin adjusting the temperature for upper or lower zone.
Press once to turn ON the cooler. Press and hold about 3 seconds to turn OFF
the cooler.
Toggles the temperature display between Celsius and Fahrenheit.
Light Control
The light will automatical turns off 10 mins later for energy saving.
Note: To keep the light staying on always, please press the lighting mark until you hear 2 “beep”
Recommended Temperature Settings
Storing wines at the proper temperature is important. To preserve them as long as possible,
wine needs to be stored at approximately 55° Fahrenheit. However, the chart below suggests
the optimal drinking temperature for the different varietal of wine.