Manualshelf

Use and Care Manual

ManualsBrandsTAZPI ManualsAppliancesCellar Cooling Unit 24 in . Single Zone 154-Bottle Built-In or Freestanding Wine Cooler with Door Lock, Stainless Steel
12345678910
7
1
5
Top Hinge
2
6
Glass Door with Handle
3
7
Safety Child Lock
4
INSTALLATION INSTRUCTIONS
Before Using Your Wine Cooler
Remove the exterior and interior packaging.
Check to be sure you have all of the following parts:
o
14 Shelves
o
2 Keys
o
Stainless Steel Handle
o
Instruction Manual
o
2 Extra Screws for Installing Handle
IMPORTANT: Before connecting this wine cooler to a power source, let it stand upright for
approximately 24 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Install the handle on the left side of the door.
To Install Stainless Steel Handle
1) Pull away the door gasket in the area where the handle is to be installed, as Illustration #1.
The gasket is easily removed by hand, no tools are necessary.
2) Align the handle with the pre-installed screws on the door frame. Tighten the screws with a