Manualshelf

Users Manual

ManualsBrandsTBS Avionics ManualsElectronics915MHz and 2.4GHz Wi-Fi Transmitter Module (Transceiver)
41424344454647484950
Configuring BetaFlight for CRSF protocol
Last thing is to set up BetaFlight. Open the configurator and connect USB to the the flight controller. Hit
“Ports” and disable UART2 and enable UART3. Click “Save and reboot”.
Next, open the “Configurations” and in the “Receiver” section pick “Serial based receiver” and “CRSF”.
To allow flight controller telemetry to be sent back, make sure “Telemetry” is enabled in the “Other
features” section.
48