Users Manual



Configuration of CORE PRO / CROSSFIRE RX with LUA Scripts
or the TBS TANGO
The CROSSFIRE allows bidirectional communication, that means the radio display interface (currently only
OpenTX radios supported) can used to remotely configure any TBS device (currently CROSSFIRE, CORE
PRO) over the BST connection.
Requirements
The following requirements must be fulfilled to be able to use this feature:
• Any OpenTX radio (any Taranis, Horus) with OpenTX 2.2.x or higher
○ Nightly builds provided in the “News” section at http://www.open-tx.org/
• TBS CROSSFIRE LUA script package on root of SD card
○ Currently provided at https://downloads.open-tx.org/2.2/sdcard/
• TBS CROSSFIRE TX/RX V1.62 or higher
• TBS CORE PRO/FPVision V1.70 or higher
• TBS CORE PRO with SmartAudio (purchased after 07/2015) - for UNIFY PRO control
Setup
Connect the devices as normal via BST cables and the fc by CRSF and make sure the CROSSFIRE radio link
is up and running.
On the radio, press and hold the “Menu” button to bring up the “Radio setup”. Press “Page” to go to page 2
“SD Card”.

Move to the “CROSSFIRE” directory and open it. Press and hold “Enter” on the “crossfire.lua” file, select
“Execute” to open the script. The device.lua file is not meant to be executed.
 



51