Product Card

FAQ

● My Tango does not bind to the receiver - both are blinking slowly green

○ Update your build-in Crossfire to 3.73 (beta) or later and retry

● After binding, the receiver shows a double pattern and I get no signals in BF/ INAV/ …

○ This is an authentication error on the crossfire. To solve it:

■ Shut down your drone and the Tango

■ Power up the Tango

■ Set it in Bind-mode

■ Power up the receiver

■ Push the bind button on the receiver

○ After a few seconds the green led on the receiver should switch to a constant green light

● I get movements BF/ INAV/ … on the 4 sticks but not from any switch

○ You need to assign the switches in the “Mixer” page of your model to a channel you’d like it

to be. For detailed informations on the mixer page, have a look at Painless360’s opentx

video series

● The switches on channel 9 and following do not show any movement in BF

○ Open the

Agent Lite/ Crossfire receiver/ General/ Mode: 12Ch

● In the Agent X/ Lite/ M the Crossfire and WiFi module do not show up

○ Navigate in the Model settings, page 1 and disable the external module

Manual written and designed by ivc.no in cooperation with TBS and Kamikatze-fpv.de.