User guide

position is far from the current memory setting.

– WhentheLEDsflashquickly,thisindicatesthattheknob

position is close to the current memory setting.

– WhentheLEDSarelitsteadily,thisindicatesthattheknob

position matches the values stored in the current memory

setting.

When the left LED is flashing, the knob position is lower than the

current memory setting. When the right LED is flashing, the knob

position is higher than the current memory setting.

OPERATION – FRONT PANEL

WYSIWYG (WhatYouSeeIsWhatYouGet)or Memory Mode

Although the three memory locations are a convenient feature

that you most likely will learn to appreciate, BH500 also features a

“WYSIWYG”modewhereyoucanrely100%onthepositionofthe

front panel controls.

EnteringWYSIWYGmodeissimple.JustpresstheMEMORY

button of the currently active preset. When no MEMORY LED is lit,

WYSIWIGmodeisselected.

Knob Positions vs. Current Settings

When you go from one memory setting to another, or when you

switchfromWYSIWYGmodetoanyofthethreememorysettings,

the position of the knobs may not reflect the current sound.

1. When you touch a knob, the parameter instantly changes to

the knob position.

2. Although the position of the knob now reflects the sound you

hear, it may still differ from the position/value stored with the

current preset. This is indicated by the two arrow LEDs in the

Compression/Tuner section.

– WhentheseLEDsflashslowly,thisindicatesthattheknob