Manual Addendum

2
UNIVIBE
BpMode
Settings: Direct/Delayed
This parameter defines how the effect behaves when the
effect is bypassed and when switching between Speed 1
and Speed 2 within the same preset. When "Direct" is
selected, Univibe is switched off immediately. When
"Delayed" is selected, you will hear that the speed slows
down gradually according to the setting of the "Release"
parameter.
PhaseReverse
Settings: Off/On
By turning the phase 180°, you will get a very intense
effect. Just try it!
Mix
Range: 0 to 100 %
This parameter sets the relationship between the level of
the dry signal and the level of the effect in this block.
OutLev – Out Level
Range: -100 to 0 dB
This parameter sets the overall output level for this
effect.
Modern Univibe
Although it is equipped with the same parameters as the
Classic Univibe, the Modern variation sounds quite
different – slightly less “swirly”, more radical and with
more phasing.