Owner's manual

44
Digital Inputs and Outputs
Connector (S/PDIF)
Formats (S/PDIF and TOSLINK)
Connector (ADAT® or TOSLINK)
Format (ADAT®)
Digital IO Engine
Clock and Jitter
Internal Sample Rates
External Sample Rates
Jitter Rejection Engine
Jitter Rejection Filter (4th order)
DIO Interface Jitter
AD/DA Conversion Jitter
Digital Output Phase (stand-alone and
across network)
Input Slip Sample Tolerance(all DIs)
Processing Delay DIO @ 96/48 kHz
Frequency Response DIO
Line Inputs Ch. 1, 2, 3, 4
Connectors
Impedance,Bal./Unbal.
FullScaleInputLevel@0dBFS
THD+N
SNR
Freq. Response
Crosstalk
ADC
A to D Conversion
A to D Delay
Mic. Inputs Ch. 1, 2
Connectors
Sensitivity Full Range Pad on/off
Total Preamp gain
Impedance, Pad on/off
NF@Rg=150ohm,Max.Gain
EIN@Rg=150ohm,Max.Gain
THD+N,Min.Gain
SNR,Min.Gain
Recording channel tools
48 bit Precision EQ
HiGain
Hi Frequency
HiBell
HiMidGain
Hi Mid Frequency
HiMidBandwith
LoMidGain
Lo Mid Frequency
LoMidBandwidth
LoGain
Lo Frequency
Lo CUT
Compression/De-Essing
Compression/De-Essing styles
Instr. Inputs Ch. 1, 2
RCA Phono, 75 Ohm
S/PDIF (24 bit), IEC 958, Pro-status bits
Optical Pipe
8-ch.@48kHz,4-ch.SMUX@96kHz
TCAT DICE II, handling all IO formats
44.1, 48, 88.2, 96, 176.4 and 192 kHz
43 to 193 kHz, jitter rejection at all rates
JET™ technology in TCAT DICE II
>3dB@10Hz,>100dB@600Hz
<1nspeak,BW:700Hzto100kHz
<42psRMS,BW:100Hzto40kHz
<0.5%ofSamplePeriod
+50%to-50%ofsampleperiod
0.15/0.3 ms
DCto23.9kHz±0.01dB@48kHz
1/4” Phone Jack (balanced)
20 kOhm/25 kOhm
+13dBu
<-100dB(0.001%)@1kHz,-1dBFS
>111dB(A),>108dB,20Hzto20kHz
+0/-0.5dB,20Hzto20kHz
<-100dB,20Hzto20kHz
24 bit, 128 x oversampling bitstream
0.68 ms / 0.63 ms @ 44.1 kHz / 48 kHz
NeutrikCombo(XLR)
-10/+10dBu<>-52/-32dBu
62dB
2000/1300 ohm
<4dB
<-127dBu
<-100dB(0.001%)@1kHz,-1dBFS
>109dB(A),>106dB,20Hzto20kHz
+/-12dB
200 Hz to 40 kHz
On:6dB/oct.shelve/Off:Parametric
+/-12dB
200 Hz to 20 kHz
0.10 to 4.0
+/-12dB
20 Hz to 2 kHz
0.10 to 4.0
+/-12dB(onlyavailablewhenLocutisoff)
20 Hz - 400 Hz
On:Cut/Off:6dB/oct.shelve
“Female Voice”, “SoftFemale Voice”,
“HardMale Voice”, “SoftMale Voice”, “Hard”,
“Guitar”,“Bass”,“Speak”,“Sax”,“Trumpet”,
“Snare”, “Percussion”, “All purpose”
Connectors
Sensitivity Range
Total Preamp gain
Impedance
THD+N,Min.Gain
SNR,Min.Gain
Crosstalk
Monitor/Line Outputs Ch. 1, 2, 3, 4
Connectors
Impedance
Level Range (Ch. 1, 2)
Fixed Full Scale Range (Ch. 3, 4)
THD+N
SNR
Freq. Response
Crosstalk
DAC
D to A Conversion
D to A Delay
Headphone Outputs
Connectors
Impedance
GainLevelRange
THD+N
SNR
Freq. Response
Crosstalk
Power @ 40 Ohm Load
Power @ 600 Ohm Load
EMC
Complies With
Safety
Certified To
Environment
Operating Temperature
Storage Temperature
Humidity
Control Interface
MIDI
FireWire (DAW)
General
Dimensions (W x H x D)
Weight
Finish
PPM Meter (Ch. 1, 2)
Mains Power Supply (included)
FireWire bus-powered
Power Consumption
Warranty Parts and labor
Neutrik Combo (1/4“ Phone Jack)
-25dBu<>+17dBu
42dB
1 MOhm
<-100dB(0.001%)@1kHz,-1dBFS
>107dB(A),>104dB,20Hzto20kHz
<-100dB,20Hzto20kHz
1/4”PhoneJack.Groundsensingdesign.
< 100 Ohm
-40dBu<>+12dBu(analoggainscale)
+12dBu
<-94dB(0.002%)@1kHz,-1dBFS
>111dB(A),>108dB,20Hzto20kHz
+0/-0.1dB,20Hzto20kHz
<-100dB,20Hzto20kHz
24bit,128xOversamplingBitstream
0.70 ms / 0.65 ms @ 44.1 kHz / 48 kHz
2 x 1/4” Phone Jack (Stereo)
80 Ohm
-80dBu<>+16dBu@300ohm(analog
gain scale)
<-94dB(0.002%)@1kHz,-1dBFS
>103dB(A),>100dB,20Hzto20kHz
+0/-0.1dB,20Hzto20kHz
<-100dB,20Hzto20kHz
200 mW
93 mW
EN 55103-1 and EN 55103-2, FCC part 15
ClassB,CISPR22ClassB
IEC 60065, EN 60065, UL60065 and CSA
E60065 CSA FILE #LR108093
32° F to 122° F (0° C to 50° C)
-22° F to 167° F (-30° C to 70° C)
Max.90%non-condensing
In/Out: 5 Pin DIN
IEEE 1394a, IEC 61883
9.28” x 2.48” x 9.5” (235.8 x 63 x 241.2 mm)
3.3 lb. (1.5 kg)
Acrylic front panel. Plated and coated steel
back plate. Rubber coated soft touch cover
surrounding metal chassis.
3 LEDs per channel
12 VDC, Adapter for 90 to 240 VAC, 50 to
60 Hz (auto select)
8 to 30 VDC
<14 W
1 Year
APPENDIX – TECHNICAL SPECIFICATIONS
Please note: Technical specifications are subject to change
without notice.