MASTER X HD NATIVE / Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- 1. Introduction
- 2. Plug-in Installation
- 3. Activate your MASTER X HD iLok license
- 4. Connection and Setup
- 5. User Interface
- 6. Navigating the MASTER X HD Desktop Controller (optional)
- 7. Dynamics Processing In-Depth
- 8. Presets
- 9. Software Updates
- 10. Specifications
11 MASTER X HD User Manual
5.5.2 Target Curves
The Curve setting determines how the 3 bands work together.
When you mouse-over the Curve or Factor area, three contour lines appear, that
show the factor setting for the Expander, Compressor, and Limiter.
Flat
All 3 bands are processed equally. So in this case, the parameters of the Low and
High Band are the same as those shown for the Mid Band. The Target Factor has
no eect. (Imagine the frequency characteristics of white noise.)
Note that when the Curve is set to Flat, the three static response graphs at the
top are identical for Low, Mid, and High.
FLAT
Bass
The High band will be processed less. (Imagine the frequency characteristics of
pink noise.)
BASS FACTOR %FACTOR setting
Exp (G), Comp (B), Lim (Y)
Air
The High band will be processed more.
AIR FACTOR %FACTOR setting
Exp (G), Comp (B), Lim (Y)
Smiley
The Low band and High band are processed more.
SMILEY FACTOR %
FACTOR setting
Exp (G), Comp (B), Lim (Y)