Algorithm Manual Revision 4

Massenburg (MDW) EQ
140 System 6000 MKII Algorithms – Firmware version 6.5.0
6 channel version
The Gain parameters are located at the Level
page.
When Linking channels in groups, the Gain set-
tings are not included.
Parameter Link
For easier operation, the EQ has different func-
tions to Link the I/O channels settings.
Parameter Link – 2 channel version
Located on the main page, the following Link op-
tions are available:
Link Relative
This option links the current settings of the left/
right channels, and adjustments are then per-
formed relatively equal to both channels.
Link Absolute
This option enables you to Link the two chan-
nels with equal settings (True Stereo operation).
When activating the ‘Link Absolute’ button, you
have to confirm that you want to link the two
channels, because the function is “destructive”
in the sense that it overwrites the settings in
Right channel with the Left channel settings.
When Absolute Link is activated, it is not pos-
sible to Link Relative or Copy channels.
Copy from Left to Right
Momentary feature that copies settings from Left
channel to Right channel.
Copy from Right to Left
Momentary feature that copies settings from
Right channel to Left channel.
Parameter Link – 6 channel version
On the main page, an Enable Linking button is
present. When activated, it is possible to as-
sign any of the six channels to one of three Link
Groups (Link A, B or C). When linking channels,
the settings from the lowest channel-number will
be copied into the higher numbered channels.
The Link groups will then be selectable with the
Channel select button located below the Output
meters. If a channel is not assigned to one of the
three groups, it can be operated as an individual
channel.
Copying of channel settings is performed in-
stantly when linking – therefore we recommend
that careful consideration is done when chang-
ing Link groups. We also recommend deactivat-
ing Enable Linking when not in use.