Algorithm Manual Revision 4

DVR-2
English Manual – Updated 2018-02-28 17
Input Trans
Emulates the sound of Input transformers typi-
cally used in vintage Reverbs. Use it to create
a warm vintage like sound. Especially good for
short Decay times.
Trim Lo Freq
A subtle damping of selected frequencies in the
lower end.
Modulation
Modulation
Sets the Depth of the modulation. Normal set to
100 %. Increase if you like a more liquid, chorus
like sound.
Hi Cut
Frequency
This is DVR-2´s HiCut and can be used to limit or
extend the overall frequency spectrum.
Q-Scale
Corresponds the small potmeters inside old-
er reverbs used to equalize sound differences
caused by electric component-tolerances. Use
the Q-scale in combination with the set with Hi-
Cut Frequency to shape the treble to your per-
sonal flavour.