Algorithm Manual Revision 4

Reverb8
40 System 6000 MKII Algorithms – Firmware version 6.5.0
Group 1 section
Use the Group 1 section of the Setup page to
specify the Reverb channels that should belong
to Reverb Channel Group 1 by clicking the re-
spective buttons.
All Reverb channels that are not assigned to
Reverb Channel Group 1 automatically be-
come part of Reverb Channel Group2.
Use the two Reverb Channel Groups to control
complex Reverbs more effectively.
Reverb8 algorithm – Rev page
Fig14. Reverb8 algorithm – Rev
page set to NHK 22.2/Mid Plane
The Rev page is used for basic setup and color
adjustment of the reverb. When producing more
output channels than 8, be sure to have Assign-
ment set correctly, i.e. to different Planes (NHK)
or to different Layers (all other formats).
It is fine to combine a Layer 1 Surround in one
Engine with a Layer 2 Column in another Engine
– but different instances of Reverb8 should
always be set to different Layers.
For the NHK 22.2 format, Reverb 8 has been
tuned for a two or three plane setup:
►
Top and Mid
or
►
Top, Mid and Bottom.