Algorithm Manual Revision 4

Reverb8
English Manual – Updated 2018-02-28 43
Reverb8 algorithm – Trim page
Fig15. Reverb8 algorithm – Trim page
Level trims and Delay offsets per output are
available on the Trim page. All parameters are
additive to Level and Pre Delay settings on the
Main page.
Delay Trim section
Delay Ch. 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8
Range: 0 to 120ms
Use the Delay Ch. 1 to Delay Ch. 8 parameters in
the Delay Trim section of the Trim page to delay
each Reverb Channel by up to 120 milliseconds.
These delay values are applied in addition to the
Pre Delay Group 1 & 2 values set on the Main
page – see “Pre Delay section” (page 37).
Delay Trim section
Output Trim Gain Ch. 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8
Range: Off, -115,5 to 0dB
Use the Gain Ch. 1 to Gain Ch. 8 parameters in
the Output Trim section of the Trim page to at-
tenuate each Reverb Channel.
The Level reduction for each Channel as defined
on this page is added to the Out Level Group 1
and Out Level Group 2 values set on the Main
page – see “Levels section” (page 36).