Algorithm Manual Revision 4

VSS™M4

66 System 6000 MKII Algorithms – Firmware version 6.5.0

VSS™M4 algorithm – levels page

In Level (Reverb 1 to 4)

Range: Off to 0dB

Individual input level of the four reverbs. If the in-

put signal is close to full scale and/or long decay

times are used, it may be necessary to attenuate

the input to avoid overload.

Reverb Level (Reverb 1 to 4)

Range: Off to 0dB

Individual reverb (wet) level of the four reverbs.

Note: This parameter is also available on the

Rev.1 to 4 sub pages.

Dry Level (Reverb 1 to 4)

Range: Off to 0dB

Individual dry signal level of the four reverbs.

In send/return configurations, the parameter

should be set to Off.

Output Level (Reverb 1 to 4)

Range: Off to 0dB

Individual output level of the four reverbs.

VSS™M4 algorithm –

reverb pages 1 to 4

VSS™M4 algorithm – reverb pages 1 to 4

Reverb

Master Decay (Reverb 1 to 4)

Range: 0.1 to 20 s

Individual Decay parameters of the four reverbs.

This parameter is also available on the Main

page.

Reverb Diffuse

Range: -50 to +50

This parameter offsets the diffusion away from

what is considered optimum for a given Decay

time.

Build

Range: Fast, Slow

Selects the speed of the build-up (ie. attack) of

the reverb.

Reverb Type (Reverb 1 to 4)

Select between different reverb types for each

of the four reverbs. By selecting different types

or different version (A, B, C, D), de-correlated re-

sponses are ensured.

This parameter is also available on the Main

page.