Manual

7.7 System/ Remote
Go to Frame/System/Remote.
This Remote page allows you to access remote features of the Reverb TwentyFour
through an external interface. For example, an external switch box can be made
so that dierent scene presets can be chosen remotely. More details of this
feature can be found on page 41.
Use this page to:
• GPI – setup, choose, and enable dierent scene presets for remote recall.
• Cal – calibrate the operation of the external equipment.
• GPO – setup operation of external LEDs.
7.8 E1-3 page
Go to Frame/E1-3.
Use this page to:
• View the User group parameters for all 3 Engines. Selecting User group
parameters is done from the Engine Edit pages E1, E2, E3.
• Values can be altered from this page, as well as from the 3 individual
Engine Edit pages.
• Press the parameter you wish to assign to the Fader located below.
• At the right of the screen is a general Wet level (Out Level)
parameter that works on all 3 engines.
Bypass Mode
• There is also an overall Mute button, which mutes the wet part only.
The Reverb TwentyFour is then in Bypass mode, and the BYPASS LED will
light on the front panel.
20 REVERB TWENTYFOUR Owner’s Manual