Manual

8.2 Library – Store
Use the Library Store page of the TC Icon software to store (save) settings to a
memory bank. You can only store settings as User presets. Factory presets cannot
be overwritten.
All colored buttons and selected items on the Store page are colored in red.
To access the Library Store page:
• Select the “Library” tab.
• Select the “Store” page.
• Select the subpage for the setting type you want to store:
• Scene – to store all settings (including Routing and
all algorithm settings) as a Scene.
• Routing – to store the current Routing.
• E(ngine) 1, 2 or 3 – to store the settings of either Engine 1, 2, or 3 as an
Engine preset.
• Select a User preset group. There are 8 User preset groups, with each group
holding up to 8 presets.
• Select a preset slot in the currently selected group that you want to use.
• Click the large “Store (Scene / Route / Engine) Preset” button to store (save)
your settings as a preset.
• The selected data type will be stored as a preset. You can then recall this
preset – see “Library – Recall page” on page 21.
Naming Presets
All user preset types can be (re)named.
To rename a preset:
• On the Store page, select the preset that you want to rename.
• Click the circular “Name” button.
• An on-screen keyboard will be shown.
• Use the on-screen keys or the physical keyboard of your computer to
edit the name.
• Click the large Enter button to conrm the new name.
Please note that the preset itself is not stored when you click the Enter button!
To store the preset with its new name, click the large “Store (Scene/ Route/
Engine) Preset” button.
Adding Preset Information
You can add information to presets you have created or modied. When recalling
such a preset later, a small inverted “Info” tag will appear at the bottom of the
large Preset Recall button, allowing you to access this additional information.
To add information to a preset:
• On the Store page, select the preset that you want to add information to.
• Click the “Info” button.
• An on-screen keyboard will be shown.
• Use the on-screen keys or the physical keyboard of your computer to
enter the information.
• Click Enter to conrm.
Please note that the preset itself is not stored when you click the Enter button!
To store the preset with the newly added information, click the large
“Store (Scene/ Route/ Engine/) Preset” button.
Operating the unit while renaming presets
Please note that even when renaming presets or adding information as
described above, the faders for the previously accessed page are still
available and operational.
Library Store Scene
Library Store Routing
Library Store Engine E1
23 REVERB TWENTYFOUR Owner’s Manual