Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- 1. Introduction
- 2. TC Icon software installation
- 3. Controls and Connectors
- 4. Overview
- 5. Setting up
- 6. Quick Setup
- 7. Basic operation with the TC Icon software
- 8. Using the Library
- 9. TC Icon Setup
- 10. Using Reverb TwentyFour
- 11. Main page
- 12. Grid page
- 13. Setup page
- 14. Rev page
- 15. Trim page
- 16. Factory presets
- 17. System/ Remote
- 18. Acoustics Enhancement
- 19. Specifications
8.3 Library – Delete
Use the Library Delete page of the TC Icon software to delete user presets
from a memory bank. You can only delete user presets. Factory presets
cannot be deleted.
Please note that all colored buttons and selected items on the Delete page are
colored in yellow.
To access the Library Delete page:
• Select the “Library” tab.
• Select the “Delete” page.
• Select the subpage for the setting type you want to delete:
• Scene.
• Routing.
• E(ngine) 1, 2, or 3.
• Select a User preset group. There are up to 8 User preset groups, with each
group holding up to 8 presets.
• Select a preset in the currently selected group that you want to delete.
• Click the large “Delete (Scene/ Route/ Engine) Preset” button to delete the
selected preset.
• You will be asked to conrm this operation before the preset is
actually deleted.
Operating the unit while deleting presets
Please note that even when deleting presets, the faders for the previously
accessed page are still available and operational.
Library Delete Scene
24 REVERB TWENTYFOUR Owner’s Manual