Manual

9.3 Security page
On the security page, you can set several features regarding device
readouts and operation.
• Sticky Clip button – Click the Sticky Clip button to activate or deactivate the
Sticky Clip feature.
• When the Sticky Clip feature is activated (button highlighted) and clock
errors or clippings are detected in a device, the red and yellow warning
indicators will remain lit until the user presses “Reset Clip” button.
This feature ensures that clock errors or clippings do not go unnoticed.
• Lock Device UI button – Click the Lock Device UI button to lock or unlock the
user interfaces of the devices controlled by the TC Icon software.
• When the Lock Device UI feature is activated (button highlighted),
the user will be able to see the settings of the currently selected
device, but he cannot change them. This will be indicated by a
semi-transparent overlay and a “Device UI is locked” message on all
device-related screens.
Joystick page
• The MIDI Joystick setup page of the TC Icon software is not required for
operating Reverb TwentyFour and is not described in this manual.
9.4 UI page
Use the 4 buttons to specify if and where the 6 faders should be shown.
Changes on this page will take eect next time you open the TC Icon software.
• Faders at bottom setting – Faders will be positioned right below the main
interface. This is the default setting.
• Fader at right side setting – One fader will be positioned to the right of the
main interface.
• No faders setting – No faders will be shown on screen.
• Always On Top – the interface will always on top, and not hidden from view.
27 REVERB TWENTYFOUR Owner’s Manual