Manual

16.2 Routing Presets
There are three routing preset groups F1, F2, F3, each with a number of presets
to select.
To review the available factory routing presets, go to Library/Recall/Routing and
select the “factory” button.
Group Presets Notes
F1: Mono,
Stereo, 24
1 in, 24 out, SMPTE 7.1 Unwrap from mono input to
24 channel output
2 in, 24 out, SMPTE 7.1 Unwrap from stereo input to
24 channel output
24 in, 24 out, SMPTE 7.1 Use with full 24 channel
mix stems. Routing is 3 x 7.1
SMPTE channel order
22.2 in, 22.2 out,
ITU-R BS.2159
Use with full 22.2 channel mix
stems. Routing is ITU-R BS.2159
channel order. Please see page 39
of this manual for more details.
Empty Routing Removes all input and
output routing
F2: 5.1
Surround
E1-E3 3x5.1 Setup for 5.1 for all 3 engines.
SMPTE, FILM, DTS channel
order avaliable
Unwrap 5x24 Going from 5.1 input to 24 channel
output. SMPTE, FILM, DTS input
channel order avaliable
E1 5.1 Route 5.1 to/from E1. SMPTE and
FILM channel order available
F3: 7.1
Surround
E1-E3 3x7.1 Setup for 7.1 for all 3 engines.
SMPTE, FILM channel
order avaliable
Unwrap 7x24 Going from 7.1 input to 24 channel
output. SMPTE, FILM input
channel order avaliable
E1 7.1 Route 7.1 to/from E1. SMPTE and
FILM channel order available
38 REVERB TWENTYFOUR Owner’s Manual