Manual

17. 2 Remote – Calibration
To calibrate GPI, go to the Frame / System / Remote/ Cal page.
Each GPI may be used to switch between up to 8 states. GPI calibration should be
performed when switching between more than two states (as it is required for
preset recall).
Current section
• The Current section of the GPI Calibration page provides live status
information for the GP inputs. Here, “Vs” denotes positive terminal on the
respective GP connector, typically 3.3 V.
Limits section
• The Limits section of the GPI Calibration page shows the lower
(“GPI Lo Threshold”) and upper (“GPI Hi Threshold”) limits of the
voltage windows for the four GP inputs.
• To calibrate a GPI input, click the respective Calibrate button and
follow the on-screen instructions.
42 REVERB TWENTYFOUR Owner’s Manual