Manual

2. TC Icon software installation
2.1 Software Installation
The Reverb TwentyFour unit has no physical controls on the front or rear panel.
It is controlled via the rear panel Ethernet connections either by a PC or Mac
computer running the free TC Icon software available from our website,
or by using the optional TC Icon remote control, available separately.
When you are working with a system involving one or multiple Reverb
TwentyFour units, you are interacting with two types of software:
2.1.1 TC Icon Software:
TC Icon is a software application that you install on the computer(s) which you
are using to access, congure, operate and update the Reverb TwentyFour unit(s).
TC Icon software is available for Microsoft Windows and
Mac OS X operating systems.
TC Icon software is free and can be installed on multiple computers.
Downloading and installing TC Icon software is described in this section
of the manual.
2.1.2 TC Reverb TwentyFour Firmware:
Reverb TwentyFour rmware is the software internally installed on the
Reverb TwentyFour. Every unit comes pre-installed with the most current
rmware version available at the time of production. You can download newer
versions of rmware from the TC website. Firmware updates will contain
bug xes and/or new features.
Reverb TwentyFour rmware updates are free.
Use the TC Icon software installed on your computer (see above) to transfer
rmware to your Reverb TwentyFour unit(s).
Downloading and installing the Reverb TwentyFour rmware updates is
described in “System/Setup/Update” on page 19.
Please check our website often for any upates to the software and rmware.
You should keep both the TC Icon software running on your computer and the
Reverb TwentyFour rmware up to date. Using the latest software and rmware
versions ensures that you benet from any bug xes and the latest features.
The following procedures show how to obtain and run the TC Icon software for
PC or Mac computers.
2.2 Installing the TC Icon software on a PC
Please go to www.tcelectronic.com and locate the Reverb TwentyFour section
or TC Icon section (as it has the same software). Alternatively, you can visit the
support\software section and locate the available software downloads for the
Reverb TwentyFour or the TC Icon remote unit.
Please note, the screenshots that follow, are of the Reverb TwentyFour section
of the website.
• Click on the button to select the Windows version of the software.
• Enter your e-mail address, press "Submit" and a link to the download will be
sent to you very shortly. If you wanted to be notied of updates and news,
you can click on the small box below where you enter your address.
• The website will conrm that an e-mail has been sent to your address.
• Open your e-mail application and check for the new e-mail we sent you:
• Open the e-mail and click on the link provided. The download will begin.
5 REVERB TWENTYFOUR Owner’s Manual