Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- 1. Introduction
- 2. TC Icon software installation
- 3. Controls and Connectors
- 4. Overview
- 5. Setting up
- 6. Quick Setup
- 7. Basic operation with the TC Icon software
- 8. Using the Library
- 9. TC Icon Setup
- 10. Using Reverb TwentyFour
- 11. Main page
- 12. Grid page
- 13. Setup page
- 14. Rev page
- 15. Trim page
- 16. Factory presets
- 17. System/ Remote
- 18. Acoustics Enhancement
- 19. Specifications
• Save the zipped le in a convenient location on your PC.
• Unzip the zipped le and save the Icon.exe executable le in a convenient
location on your PC.
2.3 Installing the TC Icon software on a Mac
Please go to www.tcelectronic.com and locate the Reverb TwentyFour section
or TC Icon section (as it has the same software). Alternatively, you can visit the
support\software section and locate the available software downloads for
the Reverb TwentyFour.
Please note, the screenshots that follow, are of the Reverb TwentyFour
section of the website.
• Click on the button to select the Mac version of the software.
• Enter your e-mail address, press "Submit" and a link to the download will be
sent to you very shortly. If you wanted to be notied of updates and news,
you can click on the small box below where you enter your address.
• The website will conrm that an e-mail has been sent to your address.
• Open your e-mail and check for the new e-mail we sent to you:
• Open the e-mail and click on the link provided.
• Save the mac.dmg le in a convenient location on your Mac.
• Click on the le and the Icon folder and drive will appear.
• Note, if you have trouble at this stage, for example, the following
screen appears: “Icon can't be opened because it is from an
unidentied developer,” then check your system preferences.
• Then select OPEN to accept and trust the le from tcelectronic.com.
6 REVERB TWENTYFOUR Owner’s Manual