Manual

• Note that the TC Icon software runs on other TC units, not just the
Reverb TwentyFour, so it may nd other units in your system, and
you can select which unit you would like to control at any given time.
• If a connection to the TC device cannot be established, please refer to
“Networking basics and troubleshooting” on page 12.
2.4.1 Updating TC Icon software (PC)
To update the TC Icon software on your computer when a newer
version is released:
• Quit the TC Icon software if it is currently running on your PC.
• Download and extract the newer version as described previously
and replace the currently installed version by copying the
newer version over it.
2.4.2 Updating TC Icon software (Mac)
To update the TC Icon software on your computer when a newer
version is released,
• Quit the TC Icon software if it currently running on your Mac.
• Download and extract the newer version as described previously
and replace the currently installed version by copying the
newer version over it.
• You can now unmount (eject) the disk image by right-clicking it
and selecting “Eject” from the context menu.
2.5 Updating the Reverb TwentyFour rmware
The TC Icon software user interface on your computer includes an area where
the Reverb TwentyFour rmware can be updated, and the various rmware and
software version numbers can be displayed. This is described in
“System/Setup/Update” on page 19.
• Regulary check the TC Electronics website for updates to the
Reverb TwentyFour rmware, and download the updated les from the
same web pages as described above for the TC Icon software downloads.
• If a newer version of the rmware is available, download it onto your
computer (PC or Mac) from the website, by clicking the rmware button.
8 REVERB TWENTYFOUR Owner’s Manual