Manual

Example:
Press SHIFT and turn the
LO-MID knob to change
the center frequency of that
control.
Sometimes “sweepable” tone controls can be a bit
tedious to work with. Here is an easy step-by-step
guide to adjusting RH750’s Low-mid band to your bass
and setup:
• BoosttheLO-MIDband–themoreyouboost,theeasierit
is to find the right frequency.
• HittheSHIFTbuttontogetaccesstothecenterfrequency
oftheEQbands.
• Now,whileplayingyourbass,slowlyturntheLO-MIDknob
to sweep the low-mid frequency across the frequency range.
• Whenyoufindthefrequencythatyouprefertocontrol,
simply hit the SHIFT button again to switch back to gain
control and set the right amount of low-mid gain.
While RH750 is in Shift mode, the SHIFT button will be
blinking to remind you that you are in Shift mode.
When you haven’t been using the RH750’s front panel
controls for about twenty seconds, the LED will flash
rapidly, and RH750 will automatically return to normal
mode.
Gain and Frequency Ranges
Bass Freq range: 71 Hz to 1120 Hz (default: 200)
BassGainrange: -24 dB to +15 dB
(Shelving type)
Low Mid Freq range: 100 Hz to 1600 Hz (default: 400)
LowMidGainrange: -24 dB to +15 dB
(Fixed 2.1 oct.)
High Mid Freq range: 200 Hz to 3150 Hz (default: 800)
HighMidGainrange: -24 dB to +15 dB
(Fixed 2.1 oct.)
Treble Freq range: 400 Hz to 6300 Hz (default: 4000)
TrebleGainrange: -24 dB to +15 dB
(Shelving type)
OPERATION – FRONT PANEL
8