Manual

OPERATION – FRONT PANEL
11
EN
7 – MASTER
Use the MASTER level knob to set the overall output level of the
amp. The master level also controls the level of the headphone
output.
8 – MUTE
The MUTE button mutes both the speaker and the balanced
output. This means that you can tune up with no sound going to
your own rig or to the PA.
9 – SHIFT
The SHIFT button is used to access the secondary functions
marked with grey text on RH750’s front panel.
The following controls have secondary functions:
Normal mode Shift mode (press SHIFT)
EQ(1-4) EQBandsCenterFrequencies
SPECTRACOMP TweeterTone adjust
TUBETONE Preset/Memory Level Settings
When you haven’t been using RH750’s front panel controls for
about twenty seconds, the RH750 will return to normal mode,
where the knobs control the primary functions printed in white.
10 – MEM 1/2/3
RH750 features three user memories which allow you to
effortlessly store and recall your favorite settings.
Storing settings is extremely simple:
– Dialinthesettingsthatyoulike
– PressandholdoneoftheMEMbuttonsforcircatwo
seconds
– WhentheMEMbuttonblinks,yoursettingshavebeen
stored
– TorecallaMEMsetting,simplypressthecorresponding
MEM button once
What is stored?
Any parameter that is operated by a light ring knob is stored.
Thismeansthesettingsofallfrontpanelcontrols–apartfrom
theMasterlevel,theSHIFTandMUTEbuttons–arestored.
Why MEM settings?
Even though many bass players tend to play with the same
sound most of the time, a lot of them do have a couple of
different basses, playing styles, pickup settings or other factors
that require amp settings to be changed. We figured that it would
be handy to simply push one button instead of fiddling with
several knobs.
Remote Control
RH750’soptionalremotecontrol–“RC-4”–allowsforfloorrecall
of all three MEM settings as well as mute and tuner display.