Manual

REAR PANEL
15
EN
MAINS IN
DIGITAL OUT AUX IN
INSERT
PRE/AMP I/O
LINE DRIVER OUT
PHONES
REMOTE IN
SPEAKER OUT
4 Ohm
minimum load
speakon w/ center 1/4" jack
AES/EBU 96kHz
(S/PDIF Compatible)
rehearse
transformer balanced
PRE PRE/POST
PRE-AMPLIFIER
POST
5 V/100 mA
100-240VAC 50/60Hz
~
MAINS GROUND MUSTBE CONNECTED
100W@1/8 of Max. Output
CLASS-D BASS AMPLIFIER
WARNING
AVIS
TO REDUCE THERISK OF FIRE OR ELECTRIC SHOCK DO NOTEXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
RISQUE DE CHOC ELECTRIQUE-NE PA SOUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SPEAKER FREE OPERATION
ALLOWED
R
CUS
FILE# 186633
PRE/POST
PREAMP
Rear Panel
1 – MAINS IN – Power In & POWER switch
The RH750’s auto-sensing switchmode power-supply accepts
anymainsvoltagefrom100to240volts–youdonothave
to change settings, fuses or anything else. Simply connect a
standard IEC three pin connector to the local mains voltage, and
you are up and running. This is particularly handy when you use
the RH750 on a tour.
The ground pin of the PSU must be connected in order to avoid
voltage differences between e.g. the PA and the RH750.
2 – PHONES
This is a 1/8” mini-jack connector for headphones. Our studio
qualityheadphoneamp–withamildspeakerfilteraddedtothe
basssound–catersforgreatsoundintheheadphones.
The headphone output also plays back any signal connected to
the AUX IN (“Rehearsal”) input jack found on the rear panel of
the RH750. This feature allows you to play along with e.g. an
MP3 player (e.g. an iPod®), a signal from a computer soundcard
oranyotheraudiosourceplayingbackgroundtracks–excellent
for rehearsing or checking out new tracks without disturbing the
neighbors.
Notice that the RH750 works equally well with or without
a speaker cabinet connected.