Owner's manual

777

Step 1:

Set up your harmony processor, microphone and PA

system as you would normally. If this is the first setup

with the harmony processor, consult its manual for

proper setup.

Harmony

Processor

Step 2:

Connect a cable from your guitar to the Guitar In jack

on HarmonyControl. Then connect a cable from the

Guitar Out jack on HarmonyControl to your amplifier

or a channel in your PA system. HarmonyControl

should be the first link in any effects chain. Any guitar

processing done before the guitar signal is fed to

HarmonyControl will reduce accuracy.

MIDI GUITAR

IN OUTIN OUT

To amp

or PA

Quick Start