Reference Manual Manual

Connection diagrams
Play Electric – Reference manual (2014-07-16) 22
Stereo (or mono) vocals and guitar
This diagram shows connections for both Stereo
and Mono PA applications.
If your Play Electric is set to Stereo, you’ll need
to pan one channel left and the other channel
right (or use a single Stereo channel) on your
mixer. Vocal/Guitar level mix is achieved within
Play Electric.
In Mono output mode, you have control over the
vocal and guitar sounds independently at the PA
mixer. In Mono mode, do not pan the channels
left and right.
The Aux input may be removed from the XLR
outputs in the setup menu if you wish (Setup –
Aux In Type).
PLAY ELECTRIC
OUT THRU IN
GUITAR
MIC IN
OUTPUTS
RIGHT LEFT
AUX
Setup example: Stereo (or mono) vocals and guitar