User manual User Manual

1/8 DOT 1/8 1/8 TRIP
1/16 DOT 1/16 1/16 TRIP
1/32 DOT 1/32 1/32 TRIP
SAMPLE LOOP CAPTURE
Defines whether the sample is repeated from a point
before the footswitch is pressed equal to the SAMPLE
LOOP DIVISION (END) or following the footswitch
press (START).
SAMPLE DIRECTION
Samples can play forward or reverse.This effect is most
noticeable on longer duration samples.
PATH
When this is set to POST, the captured sample will be
a composite of all effects that were on when it was
captured. When set to PRE the sample is captured dry
but effects can be added and removed as the sample
continues to loop.
Additional Rhythmic Features
These features help you to co-ordinate the timing of
your singing with the rhythmic effects.
COWBELL
Turning this feature on produces a metronome-type
cowbell sound to give an audible indication of the
current tempo. This is also a possible SHORTCUT
parameter so you can access it live.
LEVEL
Volume control of the cowbell sound.
PATTERN AUDITION
Allows you to hear a tone following the guitar chords
when the TYPE is set to a pattern (Division shows N/A).
This allows you to hear the patterns without singing.
Note that the COWBELL and PATTERN AUDITION
sounds are bussed into the Guitar audio path. As such,
they will not produce sound if GUITAR MUTE in the I/O tab
in the Setup menu is on.A side benefit is that, if you’d like
to use the cowbell sound in performance, any effects
you select in the Guitar FX menu will be present on the
cowbell also.
The Edit Menu: RHYTHMIC Tab
81