Operation Manual

Setup
VL3X – Reference manual (updated 2015-10-20) 181
Footswitch tab
Step Button Function parameter
Use the Step Button Function parameter to re-
map the Step footswitch to another function.
One of the following functions can be mapped
to the Step footswitch. This setting is not stored
as part of your Presets, it is applied globally. The
Step footswitch LED will light in blue (Vocal), Red
(Guitar) or Purple (Loop/System), depending on
what you have assigned to it.
Step Button Function Parameter settings
► Step
► Pitch Cor
► All Mute
► µMod
► Delay
► Reverb
► Voc HIT
► Double
► Harmony
► Transducer
► HardTune
► Rhythmic
► Stutter
► Choir
► Synth
► Harm(ony) Hold*
► Set Key
► Tap Tempo
► Bypass
► G µMod (G = guitar)
► G Delay
► G Reverb
► G HIT
► G Comp
► G Drive
► G Amp
► G Rhythm
► G Octaver
► G Wah
► G Mute
► All HIT
► Looper**
► Loop Input Cycle
► Tuner
► 1 Button Looper
► L(oop) Erase All
► (Backing) Track Start
* Harmony must be active for this to have an ef-
fect.
** Toggles the Loop/Backing Track Layer. You
may find this a more convenient way of enter-
ing the Loop Layer quickly, compared to hold-
ing the Layer button.