Operation Manual

Setup
VoiceLive 3 – Reference manual (updated 2015-10-20) 161
System tab
Global Tempo parameter
Use the Global Tempo parameter if you want to
use one global tempo setting instead of using
the tempo settings stored as part of each Preset.
When Global Tempo parameter is set to On, any
tempo set via…
► Tempo Tapping (see “Tapping tempo”),
► the Delay effect edit screen or
► Loop Metronome (see “Metronome sub-
menu”)
will apply across all Presets. The tempo values
stored in Presets will be overridden as long as
Global Tempo is On.
Global Preset parameter
Use the Global Preset parameter to define a
Global Preset that should be used as a start-
ing point/reference for all Presets where effect
blocks are set to Global ON.
Usually, you will find the Global setting at the
bottom of every effect block edit screen. As
soon as you change Global from OFF to ON
within an effect block, the corresponding effect
settings from your the Global Preset will be ap-
plied to that effect.
For more information, see “Important: The link
between the Global Preset and other Presets
goes both ways”.
Global Key/Scale parameter
Use the Global Key/Scale parameter if you want
to use one global key/scale. When Global Key/
Scale parameter is set to On and you set the
Key and Scale parameters in a Preset’s Harmo-
ny block edit screen, this key and scale will apply
to all Presets and the effects that utilize key and
scale information.