Operation Manual

Setup
VoiceLive 3 – Reference manual (updated 2015-10-20) 172
FOOTSW MODE parameters
Use the (three or six) Mode parameters below the
FOOTSW parameters to set the operation modes
of the footswitches on a TC-Helicon Switch-3 or
Switch-6 connected to your VoiceLive 3.
► Latched: Tap the footswitch on your Switch-3
or Switch-6 to activate the assigned effect,
tap it again to deactivate it.
► Momentary: The assigned effect is on only
when you hold down the footswitch.
For more information, see “Change a button
from Latched to Momentary mode”.